FLOW-3D 10.0.1

A guide to uninstall FLOW-3D 10.0.1 from your computer

FLOW-3D 10.0.1 is a computer program. This page is comprised of details on how to uninstall it from your PC. It was created for Windows by Flow Science, Inc.. Take a look here where you can find out more on Flow Science, Inc.. Click on http://www.flow3d.com to get more details about FLOW-3D 10.0.1 on Flow Science, Inc.'s website. Usually the FLOW-3D 10.0.1 program is to be found in the C:\flow3d\v10.0.1 folder, depending on the user's option during install. FLOW-3D 10.0.1's complete uninstall command line is C:\Program Files (x86)\InstallShield Installation Information\{3FAA53B8-A5BD-40D4-BCEC-6CEC3A5A5432}\setup.exe. setup.exe is the programs's main file and it takes around 1.12 MB (1176064 bytes) on disk.

The following executable files are incorporated in FLOW-3D 10.0.1. They occupy 1.12 MB (1176064 bytes) on disk.

• setup.exe (1.12 MB)

The information on this page is only about version 10.0.1 of FLOW-3D 10.0.1. Some files and registry entries are frequently left behind when you remove FLOW-3D 10.0.1.

Directories that were found:

• C:\flow3d\v10.0.1

Files remaining:

• C:\flow3d\v10.0.1\double\hydr3d\Release\hydr3d.exe
• C:\flow3d\v10.0.1\examples\boxcast\prepin.inp
• C:\flow3d\v10.0.1\examples\continuous_casting\prepin.inp
• C:\flow3d\v10.0.1\examples\core_gas\prepin.inp
• C:\flow3d\v10.0.1\examples\dielectric\prepin.inp
• C:\flow3d\v10.0.1\examples\dripout\prepin.inp
• C:\flow3d\v10.0.1\examples\drop_welding\prepin.inp
• C:\flow3d\v10.0.1\examples\efield\prepin.inp
• C:\flow3d\v10.0.1\examples\fluid_structure_interaction\prepin.inp
• C:\flow3d\v10.0.1\examples\gmo_mixers\prepin.inp
• C:\flow3d\v10.0.1\examples\gmo_rope\prepin.inp
• C:\flow3d\v10.0.1\examples\gmo_sphere\prepin.inp
• C:\flow3d\v10.0.1\examples\gsphere\prepin.inp
• C:\flow3d\v10.0.1\examples\gsphere\prepin.restart
• C:\flow3d\v10.0.1\examples\gsphlng\prepin.inp
• C:\flow3d\v10.0.1\examples\inkjet_channel\prepin.inp
• C:\flow3d\v10.0.1\examples\inkjeto\prepin.inp
• C:\flow3d\v10.0.1\examples\inkjetp\prepin.inp
• C:\flow3d\v10.0.1\examples\lfoam\prepin.inp
• C:\flow3d\v10.0.1\examples\mblock\prepin.inp
• C:\flow3d\v10.0.1\examples\mems\prepin.inp
• C:\flow3d\v10.0.1\examples\micro-pump\prepin.inp
• C:\flow3d\v10.0.1\examples\moldthrm\prepin.inp
• C:\flow3d\v10.0.1\examples\moldthrm\prepin.restart
• C:\flow3d\v10.0.1\examples\nconxz\prepin.inp
• C:\flow3d\v10.0.1\examples\porous\prepin.inp
• C:\flow3d\v10.0.1\examples\sandcore\prepin.inp
• C:\flow3d\v10.0.1\examples\scalar\prepin.inp
• C:\flow3d\v10.0.1\examples\scour\prepin.inp
• C:\flow3d\v10.0.1\examples\sediment\prepin.inp
• C:\flow3d\v10.0.1\examples\sediment\prepin.restart
• C:\flow3d\v10.0.1\examples\seg\prepin.inp
• C:\flow3d\v10.0.1\examples\semisld\prepin.inp
• C:\flow3d\v10.0.1\examples\shallow\prepin.inp
• C:\flow3d\v10.0.1\examples\shallow\topo2.inp
• C:\flow3d\v10.0.1\examples\shockx\prepin.inp
• C:\flow3d\v10.0.1\examples\shrink\prepin.inp
• C:\flow3d\v10.0.1\examples\splat\prepin.inp
• C:\flow3d\v10.0.1\examples\steam_air\prepin.inp
• C:\flow3d\v10.0.1\examples\stir\prepin.inp
• C:\flow3d\v10.0.1\examples\stl\fstl01.inp
• C:\flow3d\v10.0.1\examples\stl\prepin.inp
• C:\flow3d\v10.0.1\examples\stl\stlf01.inp
• C:\flow3d\v10.0.1\examples\stl\stlf02.inp
• C:\flow3d\v10.0.1\examples\stl\stlf03.inp
• C:\flow3d\v10.0.1\examples\stl\stlf04.inp
• C:\flow3d\v10.0.1\examples\stl\stlf05.inp
• C:\flow3d\v10.0.1\examples\stl\stlf06.inp
• C:\flow3d\v10.0.1\examples\stl\stlf07.inp
• C:\flow3d\v10.0.1\examples\stokes_wave\prepin.inp
• C:\flow3d\v10.0.1\examples\thrmstrs\prepin.inp
• C:\flow3d\v10.0.1\examples\ubore\prepin.inp
• C:\flow3d\v10.0.1\examples\weir\prepin.inp
• C:\flow3d\v10.0.1\gui\colortable.ini
• C:\flow3d\v10.0.1\gui\description.txt
• C:\flow3d\v10.0.1\gui\descrptn.f3d
• C:\flow3d\v10.0.1\gui\f3dapp.txt
• C:\flow3d\v10.0.1\gui\Helvetica-Bold.txf
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_baffle.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_boundary.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_component.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_initial_condition.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_main.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_momentum.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_scalar.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_spring.txt
• C:\flow3d\v10.0.1\gui\logictree\feat_feat_sub_component.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_baffle.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_boundary.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_component.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_initial_condition.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_momentum.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_scalar.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_spring.txt
• C:\flow3d\v10.0.1\gui\logictree\global_local_sub_component.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_baffle.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_boundary.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_component.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_initial_condition.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_main.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_momentum.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_scalar.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_spring.txt
• C:\flow3d\v10.0.1\gui\logictree\par_feat_sub_component.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_baffle.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_boundary.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_component.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_initial_condition.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_main.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_momentum.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_scalar.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_spring.txt
• C:\flow3d\v10.0.1\gui\logictree\values_array_sub_component.txt
• C:\flow3d\v10.0.1\gui\MaterialsDatabase\Air_at_15_degrees_C.f3d_dbf
• C:\flow3d\v10.0.1\gui\MaterialsDatabase\Aluminum_Alloy_357.f3d_dbf
• C:\flow3d\v10.0.1\gui\MaterialsDatabase\Aluminum_Alloy_383.f3d_dbf
• C:\flow3d\v10.0.1\gui\MaterialsDatabase\Aluminum_Alloy_4.5%_Cu.f3d_dbf
• C:\flow3d\v10.0.1\gui\MaterialsDatabase\Aluminum_Alloy_85%_Al-15%_Cu.f3d_dbf
• C:\flow3d\v10.0.1\gui\MaterialsDatabase\Aluminum_Alloy_86%_Al-14%_Mg.f3d_dbf
• C:\flow3d\v10.0.1\gui\MaterialsDatabase\Aluminum_Alloy_A360_ADC3.f3d_dbf

Registry that is not removed:

• HKEY_CURRENT_USER\Software\Flow Science\FLOW-3D
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\8B35AAF3DB5A4D04CBCEC6CEA3A54523
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\InstallShield_{3FAA53B8-A5BD-40D4-BCEC-6CEC3A5A5432}

Registry values that are not removed from your PC:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\flow3d\v10.0.1\local\flow3d.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\8B35AAF3DB5A4D04CBCEC6CEA3A54523\ProductName

A way to uninstall FLOW-3D 10.0.1 from your PC with Advanced Uninstaller PRO

FLOW-3D 10.0.1 is a program released by the software company Flow Science, Inc.. Some users try to erase this application. Sometimes this is efortful because removing this manually takes some experience related to removing Windows applications by hand. The best EASY solution to erase FLOW-3D 10.0.1 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is good because Advanced Uninstaller PRO is the best uninstaller and general tool to take care of your Windows system.

DOWNLOAD NOW

• go to Download Link
• download the program by clicking on the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take some time to get familiar with Advanced Uninstaller PRO's interface and number of functions available. Advanced Uninstaller PRO is a very good Windows optimizer.

3. Press the General Tools category


4. Activate the Uninstall Programs button


5. A list of the applications installed on your PC will be shown to you

6. Navigate the list of applications until you find FLOW-3D 10.0.1 or simply activate the Search feature and type in "FLOW-3D 10.0.1". If it exists on your system the FLOW-3D 10.0.1 application will be found automatically. After you select FLOW-3D 10.0.1 in the list of applications, the following information about the program is made available to you:

• Star rating (in the lower left corner). This explains the opinion other users have about FLOW-3D 10.0.1, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information about the app you want to uninstall, by clicking on the Properties button.

For example you can see that for FLOW-3D 10.0.1:

• The software company is: http://www.flow3d.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{3FAA53B8-A5BD-40D4-BCEC-6CEC3A5A5432}\setup.exe

7. Click the Uninstall button. A confirmation window will show up. accept the uninstall by pressing Uninstall. Advanced Uninstaller PRO will then remove FLOW-3D 10.0.1.


8. After uninstalling FLOW-3D 10.0.1, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to perform the cleanup. All the items that belong FLOW-3D 10.0.1 which have been left behind will be found and you will be able to delete them. By removing FLOW-3D 10.0.1 using Advanced Uninstaller PRO, you are assured that no registry items, files or directories are left behind on your system.

Your system will remain clean, speedy and ready to serve you properly.

Geographical user distribution

Disclaimer

This page is not a piece of advice to uninstall FLOW-3D 10.0.1 by Flow Science, Inc. from your PC, we are not saying that FLOW-3D 10.0.1 by Flow Science, Inc. is not a good software application. This text only contains detailed info on how to uninstall FLOW-3D 10.0.1 supposing you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.