Publishers

FANUC Robotics Virtual Robot Controller V9.40 FANUC Robotics Virtual Robot Controller V9.40





How to uninstall FANUC Robotics Virtual Robot Controller V9.40 from your PC

FANUC Robotics Virtual Robot Controller V9.40 is a software application. This page holds details on how to uninstall it from your PC. The Windows release was developed by FANUC Robotics America, Inc.. Further information on FANUC Robotics America, Inc. can be found here. FANUC Robotics Virtual Robot Controller V9.40 is usually installed in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC directory, however this location can differ a lot depending on the user's decision when installing the program. The full command line for uninstalling FANUC Robotics Virtual Robot Controller V9.40 is RunDll32. Keep in mind that if you will type this command in Start / Run Note you may receive a notification for admin rights. The application's main executable file has a size of 392.06 KB (401472 bytes) on disk and is called frcreatevirtualrobot.exe.

The executable files below are part of FANUC Robotics Virtual Robot Controller V9.40. They take an average of 628.11 KB (643189 bytes) on disk.

  • frcreatevirtualrobot.exe (392.06 KB)
  • frvirtual.exe (236.05 KB)


The information on this page is only about version 9.4058.09.05 of FANUC Robotics Virtual Robot Controller V9.40. You can find here a few links to other FANUC Robotics Virtual Robot Controller V9.40 releases:

...click to view all...
If planning to uninstall FANUC Robotics Virtual Robot Controller V9.40 you should check if the following data is left behind on your PC.

Folders that were found:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

The files below remain on your disk when you remove FANUC Robotics Virtual Robot Controller V9.40:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfllcyc.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfllpmc.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmacc.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmaio.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmappl.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmarth.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmauxf.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmcall.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmcdrg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmclb.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmctrls.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmdest.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmdio.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmhscd.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmif.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfminc.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmjpt.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmjump.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmlogic.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmmacro.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmmasyn.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmmisc.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmmix.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmmlgp.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmmotn.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmmulti.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnang.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnemo.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnfost.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnhm.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnlib.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnmir.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnost.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmnsft.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmofst.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmpal2.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmpctl.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmpcvis.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmpitm.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmposchk.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmpreg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmpsyn.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmpth.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmqskp.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmreg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmrot.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsens.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsflt.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmskip.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmskpj.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsqz.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsreg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmstch.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmstck.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsts.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsvgc.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsvgun.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmsvtc.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtcom.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtcspd.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtime.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtoft.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtorq.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtrk.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtsl.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmtsv.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmvofst.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmvreg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmvsblt.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmwait.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmweave.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmwhen.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfmwio.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfndnwtp.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfovsl.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfpatrig.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfpazdt.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfpc3j.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfpnio.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfprchmp.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfpsmmr.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfpthadj.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrdc2.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrdco.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrefpos.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrsmpg2.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrsmpg3.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrsmpg4.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrsmpg5.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfrsmprg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfsccie.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfseamif.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfsecat.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfsgdia.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfslmt.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfsnschg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfssg.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfsydcs.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfsyisol.dll
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V8.30\Bin\sfthaptic.dll

Registry keys:
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{C9421FE2-4856-44C9-9430-204A19D2516A}


A way to uninstall FANUC Robotics Virtual Robot Controller V9.40 with the help of Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V9.40 is an application marketed by the software company FANUC Robotics America, Inc.. Sometimes, users choose to remove it. This can be hard because deleting this by hand requires some experience regarding removing Windows programs manually. The best EASY practice to remove FANUC Robotics Virtual Robot Controller V9.40 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to optimize your PC.

DOWNLOAD NOW

  • visit Download Link
  • download the setup by pressing the green DOWNLOAD button
  • set up Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. It's recommended to take your time to get familiar with the program's design and number of tools available. Advanced Uninstaller PRO is a very good package of tools.

3. Click on the General Tools category
Go to General Tools


4. Click on the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs installed on your computer will be made available to you

6. Scroll the list of programs until you locate FANUC Robotics Virtual Robot Controller V9.40 or simply click the Search feature and type in "FANUC Robotics Virtual Robot Controller V9.40". If it is installed on your PC the FANUC Robotics Virtual Robot Controller V9.40 program will be found very quickly. Notice that when you click FANUC Robotics Virtual Robot Controller V9.40 in the list of applications, the following data about the program is shown to you:


  • Safety rating (in the lower left corner). This explains the opinion other users have about FANUC Robotics Virtual Robot Controller V9.40, ranging from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Click on the Read reviews button.
  • Details about the application you are about to uninstall, by pressing the Properties button.
7. Press the Uninstall button. A confirmation window will show up. accept the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will then uninstall FANUC Robotics Virtual Robot Controller V9.40.
Uninstall FANUC Robotics Virtual Robot Controller V9.40


8. After uninstalling FANUC Robotics Virtual Robot Controller V9.40, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to start the cleanup. All the items of FANUC Robotics Virtual Robot Controller V9.40 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling FANUC Robotics Virtual Robot Controller V9.40 with Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or folders are left behind on your computer.

Your Windows computer will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW


Disclaimer

The text above is not a recommendation to uninstall FANUC Robotics Virtual Robot Controller V9.40 by FANUC Robotics America, Inc. from your computer, we are not saying that FANUC Robotics Virtual Robot Controller V9.40 by FANUC Robotics America, Inc. is not a good application. This text simply contains detailed instructions on how to uninstall FANUC Robotics Virtual Robot Controller V9.40 in case you decide this is what you want to do. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2021-06-09 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2021-06-09 14:40:45.033