FANUC Robotics Virtual Robot Controller V9.10

How to uninstall FANUC Robotics Virtual Robot Controller V9.10 from your system

FANUC Robotics Virtual Robot Controller V9.10 is a Windows program. Read more about how to remove it from your PC. The Windows release was developed by FANUC Robotics America, Inc.. More information on FANUC Robotics America, Inc. can be seen here. The program is frequently located in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC folder (same installation drive as Windows). The entire uninstall command line for FANUC Robotics Virtual Robot Controller V9.10 is RunDll32. The application's main executable file occupies 396.06 KB (405568 bytes) on disk and is titled frcreatevirtualrobot.exe.

FANUC Robotics Virtual Robot Controller V9.10 contains of the executables below. They take 632.11 KB (647285 bytes) on disk.

• frcreatevirtualrobot.exe (396.06 KB)
• frvirtual.exe (236.05 KB)

The information on this page is only about version 9.10320.47.03 of FANUC Robotics Virtual Robot Controller V9.10. You can find below a few links to other FANUC Robotics Virtual Robot Controller V9.10 releases:

• 9.10204.28.06
• 9.10170.23.05
• 9.10
• 9.10185.25.10
• 9.10121.15.13
• 9.10163.22.06
• 9.10290.43.03
• 9.1071.07.04
• 9.10233.33.24
• 9.10176.24.04
• 9.10274.41.03
• 9.10242.36.05
• 9.1098.11.03
• 9.1065.06.05
• 9.10223.32.04
• 9.10328.48.04
• 9.10298.44.03
• 9.10313.46.05
• 9.1082.08.07
• 9.10267.40.03
• 9.10178.24.10
• 9.10222.31.06
• 9.10145.19.05
• 9.1015.01.05
• 9.10214.30.03
• 9.10258.39.03
• 9.10305.45.03
• 9.1035.03.08
• 9.10336.49.03

...click to view all...
After the uninstall process, the application leaves some files behind on the PC. Some of these are shown below.

Folders left behind when you uninstall FANUC Robotics Virtual Robot Controller V9.10:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

Usually, the following files are left on disk:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frcreatevirtualrobot.exe
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frvirtual.exe
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\abcasesp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\abtasksp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\action.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\adpt.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\aliosp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\allibsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\almainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\alogtsk.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\amgraux.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\amm.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\amtasksp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\aofs.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\apamgr.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\apax.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\apcntrl.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\aplc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\aplib.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\apspotsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\apvo.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\asbn.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\asmainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\atcellif.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\atchgp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\atsrmain.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\autotask.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\autotest.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\avst.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\awgemain.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\awpsnn.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\awrwmain.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\bcmainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\bglg.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\binasc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\callbksv.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\camainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cbacul.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cbsig.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cbskate.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cc2d.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ccgp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cclv.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ccrg.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ccvt.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cdcalbsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cetx.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cfmainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\chif.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\chnd.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\chutl.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cipcons.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cipiosp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cipmsg.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cipprod.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cipscan.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cmgrsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cmmainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cnmainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\comainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\coordm.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cplib.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cpmainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cptpmain.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\crcrc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\csge.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\csif.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cskc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cskw.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\csmainsp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\csop.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\csxc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctac.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctar.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctbc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctbi.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctbl.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctcb.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctce.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctcp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctcs.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctct.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctcy.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cteh.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctep.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctev.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctgc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctgl.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cthp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\cths.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctip.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctir.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctkcl.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctld.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctln.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctlp.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctmain.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctmc.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctml.dll
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.70\Bin\ctmo.dll

Registry that is not removed:

• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V7.70
• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V8.10
• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V8.13
• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V8.20
• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V8.30
• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V9.10
• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V9.30
• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V9.40
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{FB65A757-E9FE-49F2-A840-6F17DAC50A90}

How to uninstall FANUC Robotics Virtual Robot Controller V9.10 using Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V9.10 is a program offered by the software company FANUC Robotics America, Inc.. Some people try to uninstall this application. This is easier said than done because deleting this by hand requires some know-how related to removing Windows programs manually. The best EASY procedure to uninstall FANUC Robotics Virtual Robot Controller V9.10 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, add it. This is good because Advanced Uninstaller PRO is a very useful uninstaller and all around utility to optimize your Windows computer.

DOWNLOAD NOW

• go to Download Link
• download the program by pressing the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to admire the program's interface and wealth of functions available. Advanced Uninstaller PRO is a powerful package of tools.

3. Press the General Tools category


4. Press the Uninstall Programs feature


5. All the programs existing on the PC will be shown to you

6. Scroll the list of programs until you find FANUC Robotics Virtual Robot Controller V9.10 or simply activate the Search feature and type in "FANUC Robotics Virtual Robot Controller V9.10". If it is installed on your PC the FANUC Robotics Virtual Robot Controller V9.10 app will be found very quickly. Notice that after you select FANUC Robotics Virtual Robot Controller V9.10 in the list of programs, some data about the application is shown to you:

• Safety rating (in the left lower corner). The star rating tells you the opinion other users have about FANUC Robotics Virtual Robot Controller V9.10, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Technical information about the app you want to uninstall, by pressing the Properties button.

7. Press the Uninstall button. A confirmation window will appear. Confirm the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will uninstall FANUC Robotics Virtual Robot Controller V9.10.


8. After uninstalling FANUC Robotics Virtual Robot Controller V9.10, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to perform the cleanup. All the items of FANUC Robotics Virtual Robot Controller V9.10 which have been left behind will be detected and you will be asked if you want to delete them. By removing FANUC Robotics Virtual Robot Controller V9.10 with Advanced Uninstaller PRO, you are assured that no registry items, files or directories are left behind on your system.

Your PC will remain clean, speedy and ready to serve you properly.

Disclaimer

The text above is not a piece of advice to remove FANUC Robotics Virtual Robot Controller V9.10 by FANUC Robotics America, Inc. from your computer, we are not saying that FANUC Robotics Virtual Robot Controller V9.10 by FANUC Robotics America, Inc. is not a good software application. This page only contains detailed info on how to remove FANUC Robotics Virtual Robot Controller V9.10 supposing you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.