FANUC Robotics Virtual Robot Controller V8.20

A guide to uninstall FANUC Robotics Virtual Robot Controller V8.20 from your PC

This web page is about FANUC Robotics Virtual Robot Controller V8.20 for Windows. Here you can find details on how to uninstall it from your PC. It was developed for Windows by FANUC Robotics America, Inc.. You can read more on FANUC Robotics America, Inc. or check for application updates here. FANUC Robotics Virtual Robot Controller V8.20 is normally set up in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC folder, depending on the user's decision. RunDll32 is the full command line if you want to remove FANUC Robotics Virtual Robot Controller V8.20. FANUC Robotics Virtual Robot Controller V8.20's primary file takes about 392.06 KB (401472 bytes) and its name is frcreatevirtualrobot.exe.

The executable files below are installed along with FANUC Robotics Virtual Robot Controller V8.20. They take about 620.11 KB (634997 bytes) on disk.

• frcreatevirtualrobot.exe (392.06 KB)
• frvirtual.exe (228.05 KB)

The current page applies to FANUC Robotics Virtual Robot Controller V8.20 version 8.20 only. You can find below info on other releases of FANUC Robotics Virtual Robot Controller V8.20:

• 8.20160.24.03
• 8.2063.07.11
• 8.20113.16.09
• 8.2029.01.07
• 8.20181.29.04
• 8.20197.31.07
• 8.2092.12.11
• 8.20176.28.06
• 8.2040.02.06
• 8.20119.17.06
• 8.20209.34.04
• 8.20187.30.14
• 8.20141.20.05
• 8.20169.26.09
• 8.20167.25.06
• 8.20217.35.04

...click to view all...
After the uninstall process, the application leaves leftovers on the computer. Part_A few of these are listed below.

You should delete the folders below after you uninstall FANUC Robotics Virtual Robot Controller V8.20:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

Generally, the following files are left on disk:

• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frcreatevirtualrobot.exe
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frvirtual.exe
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AAIR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ACST.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ADPT.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AFLO.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ALLIBSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMGRAUX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMTASKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AOFS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAMGR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APCNTRL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APSPOTSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ASBN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCELLIF.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCHGP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AVST.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\BINASC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CETX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CFMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHIF.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHND.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CJMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CMMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CNMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COORDM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CPLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CRCRC.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTHP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTKCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQTSKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DBMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DELTAX.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOGTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DNLIBSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPCDICT.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVFORM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVHTTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVMEMDEV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ENCDR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERLOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERRSEV.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FCMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FNCELL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSOCK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSY.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FTP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GLOFILE.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCOM.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HTTPD.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IACMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IADG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IAMSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IBMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOPLCTSK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOSCAN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISTASKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCLIB.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSMON.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSTDIO.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LDCL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK2.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LTGUIDE.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSAT2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSLSMN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSMN2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPALAS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPS2AS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSWBIAS.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MAMAINSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCTMAIN.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCUTL.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFFLTR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFPTHCHK.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGMMGR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGT1.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MIINTR.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MJOG.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MKSP.DLL
• C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ML.DLL

You will find in the Windows Registry that the following data will not be cleaned; remove them one by one using regedit.exe:

• HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{78D6AF42-E1C3-447F-A9F4-52814AEEEEE4}

How to remove FANUC Robotics Virtual Robot Controller V8.20 from your PC with Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V8.20 is a program by FANUC Robotics America, Inc.. Frequently, people try to uninstall this application. This is difficult because doing this by hand takes some experience related to Windows program uninstallation. One of the best QUICK solution to uninstall FANUC Robotics Virtual Robot Controller V8.20 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, install it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and general tool to take care of your Windows computer.

DOWNLOAD NOW

• visit Download Link
• download the setup by clicking on the green DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to admire Advanced Uninstaller PRO's design and number of tools available. Advanced Uninstaller PRO is a powerful Windows tool.

3. Press the General Tools button


4. Press the Uninstall Programs button


5. All the programs existing on the computer will be shown to you

6. Navigate the list of programs until you locate FANUC Robotics Virtual Robot Controller V8.20 or simply activate the Search field and type in "FANUC Robotics Virtual Robot Controller V8.20". If it is installed on your PC the FANUC Robotics Virtual Robot Controller V8.20 application will be found very quickly. When you click FANUC Robotics Virtual Robot Controller V8.20 in the list , the following information about the program is available to you:

• Safety rating (in the lower left corner). The star rating explains the opinion other users have about FANUC Robotics Virtual Robot Controller V8.20, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Technical information about the app you wish to uninstall, by clicking on the Properties button.

7. Press the Uninstall button. A window asking you to confirm will show up. accept the removal by clicking the Uninstall button. Advanced Uninstaller PRO will then remove FANUC Robotics Virtual Robot Controller V8.20.


8. After removing FANUC Robotics Virtual Robot Controller V8.20, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to go ahead with the cleanup. All the items that belong FANUC Robotics Virtual Robot Controller V8.20 which have been left behind will be found and you will be able to delete them. By removing FANUC Robotics Virtual Robot Controller V8.20 using Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or folders are left behind on your system.

Your Windows system will remain clean, speedy and ready to take on new tasks.

Geographical user distribution

Disclaimer

This page is not a piece of advice to remove FANUC Robotics Virtual Robot Controller V8.20 by FANUC Robotics America, Inc. from your PC, we are not saying that FANUC Robotics Virtual Robot Controller V8.20 by FANUC Robotics America, Inc. is not a good application for your computer. This text simply contains detailed instructions on how to remove FANUC Robotics Virtual Robot Controller V8.20 supposing you decide this is what you want to do. Here you can find registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.