Publishers

FANUC Robotics Virtual Robot Controller V7.40 FANUC Robotics Virtual Robot Controller V7.40





How to uninstall FANUC Robotics Virtual Robot Controller V7.40 from your system

This web page contains detailed information on how to remove FANUC Robotics Virtual Robot Controller V7.40 for Windows. It is produced by FANUC Robotics America, Inc.. Open here where you can read more on FANUC Robotics America, Inc.. The program is usually placed in the C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC directory (same installation drive as Windows). FANUC Robotics Virtual Robot Controller V7.40's entire uninstall command line is RunDll32. frcreatevirtualrobot.exe is the FANUC Robotics Virtual Robot Controller V7.40's primary executable file and it occupies circa 388.06 KB (397376 bytes) on disk.

FANUC Robotics Virtual Robot Controller V7.40 contains of the executables below. They occupy 616.11 KB (630901 bytes) on disk.




  • frcreatevirtualrobot.exe (388.06 KB)
  • frvirtual.exe (228.05 KB)


The current page applies to FANUC Robotics Virtual Robot Controller V7.40 version 7.40112.22.04 only. You can find below info on other versions of FANUC Robotics Virtual Robot Controller V7.40:


If you are manually uninstalling FANUC Robotics Virtual Robot Controller V7.40 we advise you to check if the following data is left behind on your PC.

Directories found on disk:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

The files below remain on your disk when you remove FANUC Robotics Virtual Robot Controller V7.40:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frcreatevirtualrobot.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frvirtual.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AAIR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ABCASESP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ABTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ACST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ACTION.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ADPT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AFLO.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ALLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AMGRAUX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AMM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AMTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AOFS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APAMGR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APCNTRL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APSPOTSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\APVT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ASBN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ATCELLIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ATCHGP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ATSRMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AVST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AWGEMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AWPSNN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\AWRWMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\BGLG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\BINASC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CAMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CBACUL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CC2D.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CCGP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CCLV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CCVT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CDCALBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CETX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CFMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CHIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CHND.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CHUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPCONS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPIOSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPMSG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPPROD.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CIPSCAN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CJMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CMMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CNMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\COMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\COORDM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CPMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CPTPMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CRCRC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CSOP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CSXC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTCE.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTCP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTGL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTGV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTHP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTHS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTKCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTLD.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTLP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CTMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\CZMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DAQLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DAQSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DAQTSKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DBMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DCSLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DELTAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DJOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DJOGTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DNCASESP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DNLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DNTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DOSFILE2.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DPCDICT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DRCAGNT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DUALARC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVFMDDEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVFORM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVHTTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\DVMEMDEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\EDMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ENCDR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ERLOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\ERRSEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FCMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FNCELL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FRLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FRSOCK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FRSY.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V7.20\Bin\FTP.DLL

Use regedit.exe to manually remove from the Windows Registry the data below:
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V7.20
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V7.30
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V7.40
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V7.50
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V7.70
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V8.10
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V8.13
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller V9.10
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{FEBBCC8B-BA36-4554-839E-DE7151B513D7}

Use regedit.exe to delete the following additional values from the Windows Registry:
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\program files (x86)\fanuc\shared\off line\frvrc\frvirtual.exe
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{24BA6B68-C5F5-4B02-A178-521C79D92920}C:\program files (x86)\fanuc\shared\off line\frvrc\frvirtual.exe
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{D6D9A434-0784-4594-96AE-5268F63DCBE1}C:\program files (x86)\fanuc\shared\off line\frvrc\frvirtual.exe


How to delete FANUC Robotics Virtual Robot Controller V7.40 from your PC using Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V7.40 is a program by the software company FANUC Robotics America, Inc.. Some users choose to remove this application. This can be troublesome because removing this manually requires some knowledge regarding removing Windows programs manually. The best EASY solution to remove FANUC Robotics Virtual Robot Controller V7.40 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, install it. This is a good step because Advanced Uninstaller PRO is the best uninstaller and all around utility to optimize your Windows computer.

DOWNLOAD NOW

  • navigate to Download Link
  • download the program by clicking on the DOWNLOAD button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire the program's design and wealth of features available. Advanced Uninstaller PRO is a powerful Windows optimizer.

3. Click on the General Tools button
Go to General Tools


4. Activate the Uninstall Programs button
Go to Uninstall Programs


5. All the programs existing on the PC will appear

6. Scroll the list of programs until you find FANUC Robotics Virtual Robot Controller V7.40 or simply click the Search field and type in "FANUC Robotics Virtual Robot Controller V7.40". If it exists on your system the FANUC Robotics Virtual Robot Controller V7.40 application will be found automatically. Notice that when you click FANUC Robotics Virtual Robot Controller V7.40 in the list of programs, some data about the program is available to you:


  • Star rating (in the lower left corner). This explains the opinion other people have about FANUC Robotics Virtual Robot Controller V7.40, from "Highly recommended" to "Very dangerous".
  • Opinions by other people - Click on the Read reviews button.
  • Details about the app you wish to remove, by clicking on the Properties button.
7. Click the Uninstall button. A window asking you to confirm will come up. accept the uninstall by clicking Uninstall. Advanced Uninstaller PRO will automatically remove FANUC Robotics Virtual Robot Controller V7.40.
Uninstall FANUC Robotics Virtual Robot Controller V7.40


8. After uninstalling FANUC Robotics Virtual Robot Controller V7.40, Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to start the cleanup. All the items of FANUC Robotics Virtual Robot Controller V7.40 which have been left behind will be detected and you will be asked if you want to delete them. By uninstalling FANUC Robotics Virtual Robot Controller V7.40 using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your computer.

Your Windows PC will remain clean, speedy and able to take on new tasks.

DOWNLOAD NOW


Geographical user distribution

  • Windows 7 (6.1)
  • Windows XP (5.1)
  • 10.0
Software Application


Disclaimer

The text above is not a recommendation to uninstall FANUC Robotics Virtual Robot Controller V7.40 by FANUC Robotics America, Inc. from your computer, nor are we saying that FANUC Robotics Virtual Robot Controller V7.40 by FANUC Robotics America, Inc. is not a good application. This page only contains detailed instructions on how to uninstall FANUC Robotics Virtual Robot Controller V7.40 supposing you decide this is what you want to do. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2016-07-19 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2016-07-19 09:33:35.593