Publishers

FANUC Robotics Virtual Robot Controller V5.30 FANUC Robotics Virtual Robot Controller V5.30





A way to uninstall FANUC Robotics Virtual Robot Controller V5.30 from your PC

You can find on this page detailed information on how to uninstall FANUC Robotics Virtual Robot Controller V5.30 for Windows. The Windows version was created by FANUC Robotics America, Inc.. Check out here for more details on FANUC Robotics America, Inc.. FANUC Robotics Virtual Robot Controller V5.30 is usually set up in the C:\Program Files\FANUC\Shared\Off Line\FRVRC directory, however this location may differ a lot depending on the user's choice while installing the program. FANUC Robotics Virtual Robot Controller V5.30's complete uninstall command line is RunDll32. frcreatevirtualrobot.exe is the programs's main file and it takes around 388.06 KB (397376 bytes) on disk.

FANUC Robotics Virtual Robot Controller V5.30 is composed of the following executables which take 6.87 MB (7205627 bytes) on disk:

  • frcreatevirtualrobot.exe (388.06 KB)
  • frvirtual.exe (228.05 KB)
  • visctrlsv8.exe (5.32 MB)
  • bootmenu.exe (192.50 KB)
  • firmupdate.exe (155.00 KB)
  • frpendantmanager.exe (146.00 KB)
  • frpendantshell.exe (48.50 KB)
  • frwatson.exe (81.00 KB)
  • keytask.exe (111.00 KB)
  • rcboot.exe (9.50 KB)
  • softkeybd.exe (228.00 KB)
...click to view all...

This data is about FANUC Robotics Virtual Robot Controller V5.30 version 5.30 alone. If you are manually uninstalling FANUC Robotics Virtual Robot Controller V5.30 we advise you to verify if the following data is left behind on your PC.

Folders found on disk after you uninstall FANUC Robotics Virtual Robot Controller V5.30 from your PC:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC

Files remaining:
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frcreatevirtualrobot.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\frvirtual.exe
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AAIR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ACST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ADPT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AFLO.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ALLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMGRAUX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AMTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AOFS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAMGR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APCNTRL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\APSPOTSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ASBN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCELLIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ATCHGP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\AVST.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\BINASC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CETX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CFMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHIF.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHND.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CHUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CJMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CMMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CNMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\COORDM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CRCRC.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTHP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTKCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\CTMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DAQTSKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DBMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DELTAX.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DJOGTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DNLIBSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPCDICT.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DPLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVFORM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVHTTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\DVMEMDEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ENCDR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERLOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ERRSEV.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FCMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FNCELL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSOCK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FRSY.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\FTP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GLOFILE.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\GM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCOM.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HCUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\HTTPD.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IACMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IADG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IAMSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IBMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOPLCTSK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOSCAN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\IOUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ISTASKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KCLIB.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSMON.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\KSTDIO.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LDCL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LNTRCK2.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LTGUIDE.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSAT2AS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSLSMN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSMN2AS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPALAS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSPS2AS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUSWBIAS.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\LUUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MAMAINSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCTMAIN.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MCUTL.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFFLTR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MFPTHCHK.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGMMGR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MGT1.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MIINTR.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MJOG.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\MKSP.DLL
  • C:\Program Files (x86)\FANUC\Shared\Off Line\FRVRC\V5.30\Bin\ML.DLL

You will find in the Windows Registry that the following data will not be cleaned; remove them one by one using regedit.exe:
  • HKEY_LOCAL_MACHINE\Software\FANUC\FANUC Robotics Virtual Robot Controller
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{65507157-ACD3-4FFB-94FE-F3441F996F7A}


How to remove FANUC Robotics Virtual Robot Controller V5.30 from your computer with the help of Advanced Uninstaller PRO

FANUC Robotics Virtual Robot Controller V5.30 is an application marketed by FANUC Robotics America, Inc.. Frequently, computer users want to uninstall it. This can be easier said than done because performing this by hand takes some knowledge related to Windows program uninstallation. One of the best SIMPLE manner to uninstall FANUC Robotics Virtual Robot Controller V5.30 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, install it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and general tool to clean your computer.

DOWNLOAD NOW

  • navigate to Download Link
  • download the program by pressing the DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. It's recommended to take some time to get familiar with Advanced Uninstaller PRO's interface and wealth of functions available. Advanced Uninstaller PRO is a very useful package of tools.

3. Press the General Tools button
Go to General Tools


4. Click on the Uninstall Programs button
Go to Uninstall Programs


5. A list of the programs installed on the PC will be shown to you

6. Navigate the list of programs until you locate FANUC Robotics Virtual Robot Controller V5.30 or simply activate the Search field and type in "FANUC Robotics Virtual Robot Controller V5.30". If it exists on your system the FANUC Robotics Virtual Robot Controller V5.30 application will be found automatically. After you click FANUC Robotics Virtual Robot Controller V5.30 in the list , the following information about the application is available to you:


  • Star rating (in the left lower corner). This explains the opinion other users have about FANUC Robotics Virtual Robot Controller V5.30, from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Press the Read reviews button.
  • Details about the app you want to remove, by pressing the Properties button.
7. Press the Uninstall button. A window asking you to confirm will show up. accept the removal by pressing Uninstall. Advanced Uninstaller PRO will automatically remove FANUC Robotics Virtual Robot Controller V5.30.
Uninstall FANUC Robotics Virtual Robot Controller V5.30


8. After uninstalling FANUC Robotics Virtual Robot Controller V5.30, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to proceed with the cleanup. All the items that belong FANUC Robotics Virtual Robot Controller V5.30 which have been left behind will be found and you will be asked if you want to delete them. By removing FANUC Robotics Virtual Robot Controller V5.30 with Advanced Uninstaller PRO, you can be sure that no registry entries, files or directories are left behind on your disk.

Your system will remain clean, speedy and able to serve you properly.



Geographical user distribution

  • Windows Vista (6.0)
  • Windows XP (5.1)
  • Windows 7 (6.1)
Software Application


Disclaimer

This page is not a recommendation to remove FANUC Robotics Virtual Robot Controller V5.30 by FANUC Robotics America, Inc. from your computer, we are not saying that FANUC Robotics Virtual Robot Controller V5.30 by FANUC Robotics America, Inc. is not a good software application. This text only contains detailed instructions on how to remove FANUC Robotics Virtual Robot Controller V5.30 supposing you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.

2016-09-17 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2016-09-17 15:35:04.900