ETAP 11.0.0 ETAP 11.0.0



A guide to uninstall ETAP 11.0.0 from your system

ETAP 11.0.0 is a computer program. This page contains details on how to uninstall it from your PC. It was created for Windows by Operation Technology, Inc.. Check out here for more info on Operation Technology, Inc.. More information about the software ETAP 11.0.0 can be found at . Usually the ETAP 11.0.0 program is placed in the C:\ETAP 1100 directory, depending on the user's option during install. You can remove ETAP 11.0.0 by clicking on the Start menu of Windows and pasting the command line C:\Program Files (x86)\InstallShield Installation Information\{DBA6372F-7248-44F8-9D0A-480F0C492019}\setup.exe. Keep in mind that you might get a notification for administrator rights. The program's main executable file is called setup.exe and its approximative size is 1.12 MB (1176064 bytes).

ETAP 11.0.0 contains of the executables below. They take 1.12 MB (1176064 bytes) on disk.



  • setup.exe (1.12 MB)


The information on this page is only about version 11.0.0 of ETAP 11.0.0. Some files, folders and Windows registry data can be left behind when you are trying to remove ETAP 11.0.0 from your computer.

Folders remaining:
  • C:\ETAP 1100

The files below were left behind on your disk by ETAP 11.0.0 when you uninstall it:
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\ETAPS.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\Etaps.ini
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\ETEAView.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\ETEventViewer.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\EtInterchange.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\ETPMStatus.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\EtPSMSExcel.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\Main\ETTrend.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\psmssvr\etapspm.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\psmssvr\ETAPSPM.ini
  • C:\ETAP 1100\Clean .ini and .exe.config files\psmssvr\ETPB.ini
  • C:\ETAP 1100\Clean .ini and .exe.config files\psmssvr\OPCARSQL.exe.config
  • C:\ETAP 1100\Clean .ini and .exe.config files\psmssvr\OPCARSQL.ini
  • C:\ETAP 1100\Clean .ini and .exe.config files\psmssvr\OPCDEMO.INI
  • C:\ETAP 1100\Clean .ini and .exe.config files\psmssvr\OtiDSMon.exe.config
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Drawout\FUSE-DO-O4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Drawout\FUSE-DO-O5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-C1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-C2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-C3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-C4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-C5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-O1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-O2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-O3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-O4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\fuse2\FUSE2-O5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-C1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-C2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-C3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-C4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-C5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-O1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-O2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-O3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-O4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\Fuselink\FUSEL-O5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\ICFUSE1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\ICFUSE2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\ICFUSE3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\ICFUSE4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\ICFUSE5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\IOFUSE1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\IOFUSE2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\IOFUSE3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\IOFUSE4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Fuse\IEC\IOFUSE5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\AC Generator\SYNGEN-AC-1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\AC Generator\SYNGEN-AC-2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\AC Generator\SYNGEN-AC-3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\AC Generator\SYNGEN-AC-4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\AC Generator\SYNGEN-AC-5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\ANSI\ASYNGEN1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\ANSI\ASYNGEN2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\ANSI\ASYNGEN3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\ANSI\ASYNGEN4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\ANSI\ASYNGEN5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\IEC\ISYNGEN1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\IEC\ISYNGEN2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\IEC\ISYNGEN3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\IEC\ISYNGEN4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\IEC\ISYNGEN5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\SCADA-HMI\SYNGEN-SCADA-1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\SCADA-HMI\SYNGEN-SCADA-2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\SCADA-HMI\SYNGEN-SCADA-3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\SCADA-HMI\SYNGEN-SCADA-4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Generator, Synchronous\SCADA-HMI\SYNGEN-SCADA-5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\ANSI\AIMP1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\ANSI\AIMP2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\ANSI\AIMP3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\ANSI\AIMP4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\ANSI\AIMP5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\IEC\IIMP1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\IEC\IIMP2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\IEC\IIMP3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\IEC\IIMP4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\IEC\IIMP5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\Resistor\RESISTOR-1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\Resistor\RESISTOR-2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\Resistor\RESISTOR-3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\Resistor\RESISTOR-4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Impedance, Branch\Resistor\RESISTOR-5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\AC Motor\INDMTR-AC-1.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\AC Motor\INDMTR-AC-2.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\AC Motor\INDMTR-AC-3.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\AC Motor\INDMTR-AC-4.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\AC Motor\INDMTR-AC-5.DXF
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\ANSI\AINDMTR1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\ANSI\AINDMTR2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\ANSI\AINDMTR3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\ANSI\AINDMTR4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\ANSI\AINDMTR5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\IEC\IINDMTR1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\IEC\IINDMTR2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\IEC\IINDMTR3.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\IEC\IINDMTR4.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Motor, Induction\IEC\IINDMTR5.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Switch, Ground\ANSI\AGGsw1.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Switch, Ground\ANSI\AGGsw2.dxf
  • C:\ETAP 1100\DXFBlocks\ALTERNATIVE\Switch, Ground\ANSI\AGGsw3.dxf

Use regedit.exe to manually remove from the Windows Registry the data below:
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\InstallShield_{DBA6372F-7248-44F8-9D0A-480F0C492019}


A way to delete ETAP 11.0.0 from your computer using Advanced Uninstaller PRO

ETAP 11.0.0 is an application released by the software company Operation Technology, Inc.. Some computer users want to remove this program. This is easier said than done because doing this manually takes some knowledge regarding PCs. One of the best QUICK procedure to remove ETAP 11.0.0 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:



1. If you don't have Advanced Uninstaller PRO on your Windows PC, add it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and all around utility to clean your Windows system.

DOWNLOAD NOW

2. Run Advanced Uninstaller PRO. It's recommended to take your time to admire Advanced Uninstaller PRO's interface and wealth of tools available. Advanced Uninstaller PRO is a very good Windows optimizer.

3. Click on the General Tools button
Go to General Tools


4. Activate the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs installed on your PC will be made available to you

6. Navigate the list of programs until you find ETAP 11.0.0 or simply activate the Search feature and type in "ETAP 11.0.0". The ETAP 11.0.0 application will be found automatically. After you select ETAP 11.0.0 in the list of programs, the following information about the application is shown to you:


  • Star rating (in the lower left corner). The star rating explains the opinion other people have about ETAP 11.0.0, ranging from "Highly recommended" to "Very dangerous".
  • Opinions by other people - Click on the Read reviews button.
  • Technical information about the application you are about to remove, by clicking on the Properties button.
For example you can see that for ETAP 11.0.0:


  • The web site of the application is: http://www.OperationTechnology,Inc..com
  • The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{DBA6372F-7248-44F8-9D0A-480F0C492019}\setup.exe
7. Click the Uninstall button. A confirmation page will come up. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will automatically uninstall ETAP 11.0.0.
Uninstall ETAP 11.0.0


8. After removing ETAP 11.0.0, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to perform the cleanup. All the items that belong ETAP 11.0.0 which have been left behind will be detected and you will be able to delete them. By uninstalling ETAP 11.0.0 using Advanced Uninstaller PRO, you are assured that no registry items, files or folders are left behind on your PC.

Your system will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW

Geographical user distribution

  • Windows 7 (6.1)
  • Windows XP (5.1)
  • 10.0
  • Windows 8 (6.2)
Software Application


Disclaimer

This page is not a piece of advice to uninstall ETAP 11.0.0 by Operation Technology, Inc. from your PC, nor are we saying that ETAP 11.0.0 by Operation Technology, Inc. is not a good software application. This text simply contains detailed instructions on how to uninstall ETAP 11.0.0 in case you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.

2016-06-26 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2016-06-26 04:38:22.427