Publishers

EFT Post Processing EFT Post Processing





A guide to uninstall EFT Post Processing from your system

EFT Post Processing is a Windows application. Read below about how to remove it from your PC. It is written by EFTGroup. More info about EFTGroup can be found here. Further information about EFT Post Processing can be seen at . The application is often found in the C:\Program Files (x86)\EFT Post Processing folder (same installation drive as Windows). EFT Post Processing's full uninstall command line is MsiExec.exe /I{92B758AB-2C3F-496D-BA52-4B6995461348}. EFT Post Processing's main file takes around 3.10 MB (3253760 bytes) and is called EFT Post Processing.exe.

The following executables are incorporated in EFT Post Processing. They occupy 4.99 MB (5229568 bytes) on disk.

  • ConvertRinex.exe (93.50 KB)
  • CoordTool.exe (1,003.50 KB)
  • EFT Post Processing.exe (3.10 MB)
  • FileEditor.exe (85.00 KB)
  • VolumeCalculate.exe (390.00 KB)
  • crx2rnx.exe (48.00 KB)
  • gzip.exe (89.50 KB)
  • SP3Gate.exe (220.00 KB)
...click to view all...

The current page applies to EFT Post Processing version 2.0.0.8 alone. Click on the links below for other EFT Post Processing versions:

...click to view all...
If planning to uninstall EFT Post Processing you should check if the following data is left behind on your PC.

Folders remaining:
  • C:\Program Files (x86)\EFT Post Processing

The files below are left behind on your disk by EFT Post Processing when you uninstall it:
  • C:\Program Files (x86)\EFT Post Processing\bin\ANTINFO_NGS.txt
  • C:\Program Files (x86)\EFT Post Processing\bin\BaseGPSData.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\Clib.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\CMathAligorithm.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\Con2RinexSettings.txt
  • C:\Program Files (x86)\EFT Post Processing\bin\ConvertRinex.exe
  • C:\Program Files (x86)\EFT Post Processing\bin\CoordLib.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\CoordSetCE.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\CoordSettings.txt
  • C:\Program Files (x86)\EFT Post Processing\bin\CoordTool.exe
  • C:\Program Files (x86)\EFT Post Processing\bin\DockPanel.config
  • C:\Program Files (x86)\EFT Post Processing\bin\DXF.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\EFT Post Processing.exe
  • C:\Program Files (x86)\EFT Post Processing\bin\eft.ico
  • C:\Program Files (x86)\EFT Post Processing\bin\en\BaseGPSData.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\ConvertRinex.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\CoordEncryption.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\CoordLib.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\CoordSetCE.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\CoordTool.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\EFT Post Processing.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\FileEditor.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\HpcProjectData.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\HQC.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\NetAjust.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\PostProcess.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\QualityCheck.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\VolumeCalculate.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\WeifenLuo.WinFormsUI.Docking.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\en\ZHDFileEditor.resources.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\Encryption.dll
  • C:\Program Files (x86)\EFT Post Processing\bin\ErrorLogs.txt
  • C:\Program Files (x86)\EFT Post Processing\bin\FileEditor.exe
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\Calculated.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 01 CM 3E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 02 CM 9E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 03 CM 15E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 04 CM 21E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 05 CM 27E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 06 CM 33E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 07 CM 39E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 08 CM 45E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 09 CM 51E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 10 CM 57E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 11 CM 63E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 12 CM 69E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 13 CM 75E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 14 CM 81E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 15 CM 87E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 16 CM 93E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 17 CM 99E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 18 CM 105E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 19 CM 111E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 20 CM 117E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 21 CM 123E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 22 CM 129E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 23 CM 135E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 24 CM 141E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 25 CM 147E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 26 CM 153E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 27 CM 159E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 28 CM 165E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 29 CM 171E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 30 CM 177E TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 31 CM 177W TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 32 CM 171W TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 33 CM 165W TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 34 CM 159W TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 35 CM 153W TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42 Trimble Datum\CK42 Zone 36 CM 147W TD.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 01 CM 3E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 02 CM 9E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 03 CM 15E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 04 CM 21E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 05 CM 27E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 06 CM 33E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 07 CM 39E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 08 CM 45E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 09 CM 51E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 10 CM 57E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 11 CM 63E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 12 CM 69E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 13 CM 75E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 14 CM 81E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 15 CM 87E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 16 CM 93E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 17 CM 99E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 18 CM 105E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 19 CM 111E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 20 CM 117E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 21 CM 123E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 22 CM 129E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 23 CM 135E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 24 CM 141E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 25 CM 147E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 26 CM 153E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 27 CM 159E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 28 CM 165E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 29 CM 171E.dam
  • C:\Program Files (x86)\EFT Post Processing\bin\GeoPath\CK42\CK42 Zone 30 CM 177E.dam

Registry keys:
  • HKEY_CLASSES_ROOT\.gns\EFTGroup.EFT Post Processing.GNS
  • HKEY_CLASSES_ROOT\EFTGroup.EFT Post Processing.GNS
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BA857B29F3C2D694AB25B49659643184
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{92B758AB-2C3F-496D-BA52-4B6995461348}

Open regedit.exe to remove the registry values below from the Windows Registry:
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BA857B29F3C2D694AB25B49659643184\ProductName


How to remove EFT Post Processing from your computer with the help of Advanced Uninstaller PRO

EFT Post Processing is a program offered by the software company EFTGroup. Sometimes, people choose to uninstall this program. This is efortful because uninstalling this by hand takes some skill related to Windows program uninstallation. The best SIMPLE action to uninstall EFT Post Processing is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is good because Advanced Uninstaller PRO is a very potent uninstaller and all around tool to clean your computer.

DOWNLOAD NOW

  • visit Download Link
  • download the setup by clicking on the green DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. It's recommended to take some time to admire Advanced Uninstaller PRO's interface and number of tools available. Advanced Uninstaller PRO is a very good package of tools.

3. Press the General Tools category
Go to General Tools


4. Press the Uninstall Programs button
Go to Uninstall Programs


5. All the applications existing on the computer will be shown to you

6. Scroll the list of applications until you locate EFT Post Processing or simply click the Search field and type in "EFT Post Processing". If it is installed on your PC the EFT Post Processing application will be found very quickly. Notice that after you click EFT Post Processing in the list of applications, some information about the program is available to you:


  • Safety rating (in the left lower corner). This explains the opinion other users have about EFT Post Processing, ranging from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Press the Read reviews button.
  • Technical information about the application you want to remove, by clicking on the Properties button.
For instance you can see that for EFT Post Processing:





  • The software company is: www.eftgroup.ru
  • The uninstall string is: MsiExec.exe /I{92B758AB-2C3F-496D-BA52-4B6995461348}
7. Click the Uninstall button. A confirmation window will show up. accept the uninstall by pressing Uninstall. Advanced Uninstaller PRO will then remove EFT Post Processing.
Uninstall EFT Post Processing


8. After removing EFT Post Processing, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to start the cleanup. All the items of EFT Post Processing that have been left behind will be detected and you will be able to delete them. By removing EFT Post Processing using Advanced Uninstaller PRO, you are assured that no registry entries, files or directories are left behind on your PC.

Your computer will remain clean, speedy and ready to run without errors or problems.

DOWNLOAD NOW


Disclaimer

The text above is not a piece of advice to uninstall EFT Post Processing by EFTGroup from your PC, we are not saying that EFT Post Processing by EFTGroup is not a good application for your computer. This page simply contains detailed instructions on how to uninstall EFT Post Processing supposing you decide this is what you want to do. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.

2023-07-25 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2023-07-25 11:46:21.060