DoubleCAD XT

How to uninstall DoubleCAD XT from your system

This web page contains thorough information on how to uninstall DoubleCAD XT for Windows. It was coded for Windows by IMSIDesign. Further information on IMSIDesign can be found here. Detailed information about DoubleCAD XT can be found at http://www.imsidesign.com. DoubleCAD XT is usually installed in the C:\Program Files\IMSIDesign\DoubleCAD XT directory, but this location can vary a lot depending on the user's decision while installing the application. MsiExec.exe /I{11058033-A2F2-4815-BB04-9EB00B569571} is the full command line if you want to uninstall DoubleCAD XT. The program's main executable file has a size of 7.03 MB (7368704 bytes) on disk and is titled doublecadxt.exe.

DoubleCAD XT installs the following the executables on your PC, occupying about 8.54 MB (8953856 bytes) on disk.

• doublecadxt.exe (7.03 MB)
• TCStart.exe (96.00 KB)
• TCTips.exe (112.00 KB)
• ThumbSetup.exe (380.00 KB)
• TraceApp.exe (960.00 KB)

The current web page applies to DoubleCAD XT version 1.1 alone. You can find below info on other versions of DoubleCAD XT:

• 1.0

Several files, folders and registry entries will be left behind when you remove DoubleCAD XT from your computer.

Folders left behind when you uninstall DoubleCAD XT:

• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT
• C:\Users\%user%\AppData\Local\VirtualStore\Program Files (x86)\IMSIDesign\DoubleCAD XT
• C:\Users\%user%\AppData\Roaming\IMSIDesign\DoubleCAD\1\XT
• C:\Users\%user%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Dessin\IMSIDesign DoubleCAD XT

The files below remain on your disk when you remove DoubleCAD XT:

• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Documentation\DoubleCADXT_GSG.pdf
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Documentation\ReadME.rtf
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Internet\ACAD_Express.jpg
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Internet\palette.html
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\ABOUTBOX.DLL
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\acPlotStyle.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\adinit.dat
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\american.vtd
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\atl71.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\BPStyleFolder.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\CalcApi.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\CgmLib.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\COMProperties.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\CSH.DLL
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\ctxhelpapi.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Dbapi16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\dbghelp.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\dbpps.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\dbprf.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\dbptapi.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\dbStylesEx.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\dbtieapi16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DBXMLAPI.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DgnPro.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DgnPro8Dll.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DirectDWGConverter16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\doublecadxt.exe
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\doublecadxt.hhm
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\doublecadxt.pdf
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DraftingEngine.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Arc1dr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Arc2dr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Asstdr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\BPMngr.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Cadedr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\CopyPrs.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Dblldr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Dimsdr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Editdr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Griddr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\JointPolyline.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Linedr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Measdr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Meetdr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Miscdr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\OffsetPolyline.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\PickInside.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\PlaneBool.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Pntdra16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\pscdrag16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Se3ddr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\SnapTool.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\TCImageDrg.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\TCImageTool.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\tcldrag.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Textdr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\tracedrag.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Walker16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\Draggers\Wpldr16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DwgDatabaseProvider.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecArchBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecArchBase40_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecArchBase50_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecArchDACHBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecArchDACHBase40_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecArchDACHBase50_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecAreaCalculationBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecAreaCalculationBase40_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecAreaCalculationBase50_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecBase40_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecBase50_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecGeometry_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecSchedule_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecSchedule40_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecSchedule50_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecScheduleData_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecScheduleData40_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecScheduleData50_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecStructureBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecStructureBase40_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecStructureBase50_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecUIArchBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecUIBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecUISchedule_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\AecUIStructureBase_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_AcisBuilder_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Alloc_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Br_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Db_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_DbRoot_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Dwf7Export_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Dwf7Import_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Ge_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Gi_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Gs_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_Root_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DD_SpatialIndex_tc16.dll
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DrxShell_tc16.drx
• C:\Program Files (x86)\IMSIDesign\DoubleCAD XT\Program\DWGdirect\DrxShell_tc16.trx

Registry that is not removed:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\330850112F2A5184BB40E90BB0655917
• HKEY_LOCAL_MACHINE\Software\IMSIDesign\DoubleCAD XT 1
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{11058033-A2F2-4815-BB04-9EB00B569571}

Registry values that are not removed from your PC:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\330850112F2A5184BB40E90BB0655917\ProductName

A way to remove DoubleCAD XT with Advanced Uninstaller PRO

DoubleCAD XT is a program by the software company IMSIDesign. Sometimes, people choose to remove this program. Sometimes this is hard because deleting this manually takes some experience regarding Windows program uninstallation. The best EASY action to remove DoubleCAD XT is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, add it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and general tool to clean your Windows PC.

DOWNLOAD NOW

• navigate to Download Link
• download the program by pressing the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire Advanced Uninstaller PRO's design and number of functions available. Advanced Uninstaller PRO is a very good system utility.

3. Click on the General Tools button


4. Click on the Uninstall Programs button


5. All the applications installed on your PC will be shown to you

6. Scroll the list of applications until you find DoubleCAD XT or simply click the Search field and type in "DoubleCAD XT". If it is installed on your PC the DoubleCAD XT application will be found very quickly. After you click DoubleCAD XT in the list of apps, the following data regarding the program is made available to you:

• Safety rating (in the left lower corner). This explains the opinion other users have regarding DoubleCAD XT, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Click on the Read reviews button.
• Details regarding the program you want to remove, by pressing the Properties button.

For example you can see that for DoubleCAD XT:

• The web site of the application is: http://www.imsidesign.com
• The uninstall string is: MsiExec.exe /I{11058033-A2F2-4815-BB04-9EB00B569571}

7. Click the Uninstall button. A confirmation window will come up. accept the removal by clicking Uninstall. Advanced Uninstaller PRO will then remove DoubleCAD XT.


8. After uninstalling DoubleCAD XT, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to go ahead with the cleanup. All the items that belong DoubleCAD XT which have been left behind will be detected and you will be able to delete them. By removing DoubleCAD XT using Advanced Uninstaller PRO, you are assured that no Windows registry items, files or folders are left behind on your system.

Your Windows system will remain clean, speedy and able to run without errors or problems.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to uninstall DoubleCAD XT by IMSIDesign from your computer, we are not saying that DoubleCAD XT by IMSIDesign is not a good application. This text simply contains detailed instructions on how to uninstall DoubleCAD XT in case you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.