Publishers

Cutting Plotter Controller Cutting Plotter Controller





How to uninstall Cutting Plotter Controller from your PC

You can find below detailed information on how to remove Cutting Plotter Controller for Windows. The Windows release was created by Graphtec. More information on Graphtec can be found here. Cutting Plotter Controller is usually installed in the C:\Program Files\GTCTPL Controller directory, however this location can vary a lot depending on the user's choice while installing the application. The full command line for uninstalling Cutting Plotter Controller is RunDll32. Keep in mind that if you will type this command in Start / Run Note you might receive a notification for administrator rights. The application's main executable file is named CPCTL.EXE and its approximative size is 560.00 KB (573440 bytes).

The executable files below are part of Cutting Plotter Controller. They occupy about 560.00 KB (573440 bytes) on disk.

  • CPCTL.EXE (560.00 KB)


The current page applies to Cutting Plotter Controller version 1.20.4 only. You can find here a few links to other Cutting Plotter Controller versions:


After the uninstall process, the application leaves leftovers on the PC. Part_A few of these are shown below.

You should delete the folders below after you uninstall Cutting Plotter Controller:
  • C:\Program Files (x86)\GTCTPL Controller

Files remaining:
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_DOWN_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_DOWN_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_LEFT_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_LEFT_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_RIGHT_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_RIGHT_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_UP_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ARW_UP_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\BG_MAIN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\BUTTON_1_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\BUTTON_1_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\BUTTON_2_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\BUTTON_2_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\BUTTON_3_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\BUTTON_3_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_105x14_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_105x14_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_105x14_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_278x14_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_278x14_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_278x14_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_65x14_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_65x14_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_65x14_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_84x14_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_84x14_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\COMBO_84x14_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CROSS_CUT_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CROSS_CUT_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CROSS_CUT_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_ALL_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_BLUE_1.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_BLUE_1_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_BLUE_2.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_BLUE_2_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_GREEN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_GREEN_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_KB130SERIES.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_KB130SERIES_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_KF550SERIES.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_KF550SERIES_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_OTHER.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_OTHER_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_PPA33-TP12.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_PPA33-TP12_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_RED.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_RED_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_SD500SERIES.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\CUT_SD500SERIES_BIG.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\IMG_LANDSCAPE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\IMG_LANDSCAPE_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\IMG_PORTRAIT.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\IMG_PORTRAIT_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ORIGIN_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\ORIGIN_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_OFF.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_OFF_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_OFF_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_OFF_TB_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_ON.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_ON_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_ON_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_LS_ON_TB_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_OFF.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_OFF_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_OFF_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_OFF_TB_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_ON.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_ON_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_ON_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\PT_PR_ON_TB_MR.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_OFF_LANDSCAPE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_OFF_LANDSCAPE_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_OFF_PORTRAIT.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_OFF_PORTRAIT_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_ON_LANDSCAPE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_ON_LANDSCAPE_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_ON_PORTRAIT.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\RT_ON_PORTRAIT_TB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\SCRL_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\SCRL_KNOB.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\SCRL_L_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\SCRL_R_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\SCRL_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TB_AREA_DISABLE.bmp
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TB_AREA_RT_OFF_INSIDE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TB_AREA_RT_OFF_OUTSIDE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TB_AREA_RT_ON_INSIDE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TB_AREA_RT_ON_OUTSIDE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TB_INSIDE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TB_OUTSIDE.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TEST_CUT_5_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TEST_CUT_5_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TEST_CUT_5_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TEST_CUT_DIS.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TEST_CUT_DOWN.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\TEST_CUT_UP.BMP
  • C:\Program Files (x86)\GTCTPL Controller\BMP\CMN\Thumbs.db
  • C:\Program Files (x86)\GTCTPL Controller\BMP\ENG\TB_LENGTH_THICKNESS.bmp
  • C:\Program Files (x86)\GTCTPL Controller\BMP\ENG\Thumbs.db

You will find in the Windows Registry that the following data will not be removed; remove them one by one using regedit.exe:
  • HKEY_CURRENT_USER\Software\Graphtec\Cutting Plotter Controller
  • HKEY_LOCAL_MACHINE\Software\Graphtec\Cutting Plotter Controller
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{10FD4A86-EE87-4352-AAFE-EC9E4BAFA811}


A way to remove Cutting Plotter Controller with Advanced Uninstaller PRO

Cutting Plotter Controller is a program marketed by the software company Graphtec. Frequently, people try to uninstall this application. Sometimes this is difficult because doing this manually takes some skill regarding Windows internal functioning. One of the best SIMPLE solution to uninstall Cutting Plotter Controller is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is a good step because Advanced Uninstaller PRO is a very potent uninstaller and general tool to maximize the performance of your system.

DOWNLOAD NOW

  • visit Download Link
  • download the program by pressing the green DOWNLOAD button
  • install Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. Take some time to get familiar with Advanced Uninstaller PRO's interface and wealth of tools available. Advanced Uninstaller PRO is a powerful Windows optimizer.

3. Press the General Tools button
Go to General Tools


4. Press the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs installed on the computer will be made available to you

6. Scroll the list of programs until you find Cutting Plotter Controller or simply activate the Search feature and type in "Cutting Plotter Controller". The Cutting Plotter Controller application will be found very quickly. Notice that when you click Cutting Plotter Controller in the list of applications, the following information about the program is made available to you:


  • Star rating (in the lower left corner). This explains the opinion other users have about Cutting Plotter Controller, ranging from "Highly recommended" to "Very dangerous".
  • Opinions by other users - Press the Read reviews button.
  • Technical information about the app you wish to uninstall, by pressing the Properties button.
7. Press the Uninstall button. A confirmation window will appear. Confirm the removal by pressing the Uninstall button. Advanced Uninstaller PRO will remove Cutting Plotter Controller.
Uninstall Cutting Plotter Controller


8. After uninstalling Cutting Plotter Controller, Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to start the cleanup. All the items that belong Cutting Plotter Controller that have been left behind will be detected and you will be asked if you want to delete them. By removing Cutting Plotter Controller using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your computer.

Your Windows computer will remain clean, speedy and ready to take on new tasks.



Geographical user distribution

  • Windows 7 (6.1)
  • Windows 8.1 (6.3)
  • Windows XP (5.1)
  • 10.0
Software Application


Disclaimer

This page is not a piece of advice to remove Cutting Plotter Controller by Graphtec from your computer, nor are we saying that Cutting Plotter Controller by Graphtec is not a good application for your PC. This text only contains detailed instructions on how to remove Cutting Plotter Controller supposing you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.

2016-06-25 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2016-06-25 07:35:46.227