Creo Options Modeler Version 2.0 Datecode [M020]

How to uninstall Creo Options Modeler Version 2.0 Datecode [M020] from your system

This page contains thorough information on how to remove Creo Options Modeler Version 2.0 Datecode [M020] for Windows. It is produced by PTC. More info about PTC can be seen here. More info about the program Creo Options Modeler Version 2.0 Datecode [M020] can be found at http://www.ptc.com/product/creo/options-modeler. The program is frequently placed in the C:\Program Files\PTC\Creo 2.0\Options Modeler directory (same installation drive as Windows). You can remove Creo Options Modeler Version 2.0 Datecode [M020] by clicking on the Start menu of Windows and pasting the command line C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\uninstall.exe. Keep in mind that you might receive a notification for administrator rights. Creo Options Modeler Version 2.0 Datecode [M020]'s primary file takes around 23.16 MB (24287632 bytes) and its name is optionsmodeler.exe.

The executable files below are installed together with Creo Options Modeler Version 2.0 Datecode [M020]. They take about 23.74 MB (24897712 bytes) on disk.

• optionsmodeler.exe (23.16 MB)
• uninstall.exe (297.89 KB)

The current page applies to Creo Options Modeler Version 2.0 Datecode [M020] version 2.0 only. Creo Options Modeler Version 2.0 Datecode [M020] has the habit of leaving behind some leftovers.

You should delete the folders below after you uninstall Creo Options Modeler Version 2.0 Datecode [M020]:

• C:\Program Files\PTC\Creo 2.0\Options Modeler

Usually, the following files remain on disk:

• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\msvcr100.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\optionsmodeler.bat
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\optionsmodeler.exe
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\optionsmodeler.psf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\optionsmodeler_borrow.bat
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\asyncoremt.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\baselibmt.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\btkzlibmt.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\coretools_sh.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\coreutils_sh.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\i18nmt.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\ic_sh.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\installmgr.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\ipc_comms_sh.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\libbrowser_api_sh.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\libui_sh.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\msvcp100.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\msvcr100.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\rtlcoremt.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\ucore46.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\udata46.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\uitools_sh.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\utfstrmt.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\i486_nt\xercesc280mt.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_chinese_cn_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_chinese_tw_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_french_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_german_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_italian_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_japanese_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_korean_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_russian_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\proe\uitools\text\compiled_resource\uitools_spanish_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\coreutils.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\Data_Collection_Policy.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\pim.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\pim.ndx
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\pim_install_guide.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\ui.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\ui_comdlg.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_cn\uitools.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\coreutils.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\Data_Collection_Policy.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\pim.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\pim.ndx
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\pim_install_guide.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\ui.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\ui_comdlg.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\chinese_tw\uitools.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_chinese_cn_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_chinese_tw_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_french_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_german_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_italian_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_japanese_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_korean_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_russian_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pim_default_spanish_resources.dll
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\compiled_resource\pimsetup.sdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\chinese_cn\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\chinese_cn\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\chinese_tw\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\chinese_tw\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\french\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\french\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\german\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\german\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\italian\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\italian\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\japanese\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\japanese\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\korean\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\korean\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\russian\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\russian\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\spanish\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\spanish\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\usascii\license_agree.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\eula\usascii\license_agree.txt
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\coreutils.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\Data_Collection_Policy.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\pim.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\pim.ndx
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\pim_install_guide.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\ui.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\ui_comdlg.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\french\uitools.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\coreutils.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\Data_Collection_Policy.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\pim.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\pim.ndx
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\pim_install_guide.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\ui.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\ui_comdlg.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\german\uitools.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\italian\coreutils.cmp
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\italian\Data_Collection_Policy.pdf
• C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\pim\text\italian\pim.cmp

Registry that is not cleaned:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Creo Options Modeler Version 2.0 Datecode [M020]

A way to delete Creo Options Modeler Version 2.0 Datecode [M020] from your PC with Advanced Uninstaller PRO

Creo Options Modeler Version 2.0 Datecode [M020] is a program marketed by PTC. Sometimes, computer users choose to remove it. Sometimes this is hard because uninstalling this manually takes some experience regarding Windows program uninstallation. The best EASY procedure to remove Creo Options Modeler Version 2.0 Datecode [M020] is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, add it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to clean your PC.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by pressing the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire the program's interface and number of functions available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Click on the General Tools category


4. Click on the Uninstall Programs button


5. All the applications installed on your PC will be made available to you

6. Scroll the list of applications until you locate Creo Options Modeler Version 2.0 Datecode [M020] or simply activate the Search feature and type in "Creo Options Modeler Version 2.0 Datecode [M020]". The Creo Options Modeler Version 2.0 Datecode [M020] program will be found very quickly. Notice that after you click Creo Options Modeler Version 2.0 Datecode [M020] in the list , some data about the program is available to you:

• Star rating (in the left lower corner). The star rating tells you the opinion other users have about Creo Options Modeler Version 2.0 Datecode [M020], ranging from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Details about the program you wish to uninstall, by pressing the Properties button.

For instance you can see that for Creo Options Modeler Version 2.0 Datecode [M020]:

• The publisher is: http://www.ptc.com/product/creo/options-modeler
• The uninstall string is: C:\Program Files\PTC\Creo 2.0\Options Modeler\bin\uninstall.exe

7. Click the Uninstall button. A window asking you to confirm will come up. Confirm the uninstall by pressing Uninstall. Advanced Uninstaller PRO will remove Creo Options Modeler Version 2.0 Datecode [M020].


8. After removing Creo Options Modeler Version 2.0 Datecode [M020], Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to start the cleanup. All the items of Creo Options Modeler Version 2.0 Datecode [M020] which have been left behind will be detected and you will be asked if you want to delete them. By uninstalling Creo Options Modeler Version 2.0 Datecode [M020] with Advanced Uninstaller PRO, you are assured that no registry entries, files or folders are left behind on your PC.

Your computer will remain clean, speedy and ready to serve you properly.

Geographical user distribution

Disclaimer

This page is not a recommendation to remove Creo Options Modeler Version 2.0 Datecode [M020] by PTC from your computer, we are not saying that Creo Options Modeler Version 2.0 Datecode [M020] by PTC is not a good application for your computer. This page simply contains detailed info on how to remove Creo Options Modeler Version 2.0 Datecode [M020] in case you decide this is what you want to do. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.