Creo Elements/Direct Finite Element Analysis 18.1 ( x64 )

How to uninstall Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) from your computer

Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) is a Windows application. Read more about how to remove it from your computer. The Windows version was created by Parametric Technology GmbH. Check out here where you can get more info on Parametric Technology GmbH. Please open http://www.ptc.com if you want to read more on Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) on Parametric Technology GmbH's website. Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) is typically set up in the C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1 folder, however this location can differ a lot depending on the user's option when installing the program. The entire uninstall command line for Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) is MsiExec.exe /I{00B1D0AB-F741-4B11-B948-645014F23CD7}. The program's main executable file occupies 56.16 MB (58892288 bytes) on disk and is titled analysis.exe.

Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) installs the following the executables on your PC, taking about 199.43 MB (209114624 bytes) on disk.

• fixunfmt.exe (56.00 KB)
• nastran.exe (56.00 KB)
• msccfg.exe (56.00 KB)
• mscmsgw.exe (36.00 KB)
• nastranw.exe (84.00 KB)
• mscact.exe (76.00 KB)
• analysis.8664.exe (68.00 MB)
• analysis.dmp.8664.exe (58.75 MB)
• analysis.exe (56.16 MB)
• beamserv_irc.exe (272.00 KB)
• beamserv_vc.exe (560.00 KB)
• ddamish.exe (540.00 KB)
• ddladd.exe (1.30 MB)
• ddlprt.exe (552.00 KB)
• ddlqry.exe (560.00 KB)
• demo1.exe (528.00 KB)
• demo2.exe (512.00 KB)
• dr3serv_irc.exe (260.00 KB)
• dr3serv_vc.exe (552.00 KB)
• estimate.exe (356.00 KB)
• getmemmap.exe (64.00 KB)
• getnext.exe (388.00 KB)
• heatconv.exe (108.00 KB)
• mattst.exe (416.00 KB)
• mscdate.exe (48.00 KB)
• mscfpp.exe (152.00 KB)
• mscid.exe (52.00 KB)
• msclstat.exe (804.00 KB)
• MSCRmtCmd.exe (104.00 KB)
• MSCRmtMgr.exe (100.00 KB)
• mscrsh.exe (56.00 KB)
• MSCsrv32.exe (828.00 KB)
• msctee.exe (40.00 KB)
• msctime.exe (56.00 KB)
• msgcmp.exe (56.00 KB)
• nastran.exe (652.00 KB)
• neutrl.exe (432.00 KB)
• op4util.exe (96.00 KB)
• optconv.exe (92.00 KB)
• plotps.exe (504.00 KB)
• qaprt.exe (592.00 KB)
• rcout2.exe (476.00 KB)
• receive.exe (564.00 KB)
• smplr.exe (624.00 KB)
• spxserva_irc.exe (636.00 KB)
• spxserva_vc.exe (556.00 KB)
• spxservb_irc.exe (652.00 KB)
• syslimit.8664.exe (50.00 KB)
• tabtst.exe (396.00 KB)
• trans.exe (656.00 KB)

...click to view all...

The current page applies to Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) version 18.1.2004 alone. You can find below a few links to other Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) versions:

• 18.1.6001

Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) has the habit of leaving behind some leftovers.

You should delete the folders below after you uninstall Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ):

• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1

Generally, the following files are left on disk:

• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\acct
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\fixunfmt.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\msc2008.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\msccfg.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\mscmsgw.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\nast2008.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\nast2008w.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\nastran.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\bin\nastranw.exe
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\conf\NAST2008.rcf
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\INSTALL.html
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\INSTALL.txt
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\access.bat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\access.ksh
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\clkeys.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\dbctbd.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ddladd.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ddlprt.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ddlqry.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\demo1.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\demo2.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\grdblk.cmn
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\grfist.cmn
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld2001.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld2004.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld66.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld67.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld675.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld68.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld681.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld69.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld70.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld705.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld706.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ld707.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\makefile.i386
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\makefile.unix
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\msort.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\ptrblk.prm
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\smplr.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\sysfil.cmn
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\access\vernum.prm
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bmsrv.bat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bmsrv.ksh
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\brtuc.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\brtug.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\brtui.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\brtup.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bsbrc.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bsbrg.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bsbri.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bsbrp.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bsbrt.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bscon.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bsgrq.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\bsmsg.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\makefile.i386
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\makefile.unix
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\memftnpt.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\mevbr.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\msbrc.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\msbrg.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\bmsrv\msbri.F
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\AccessManual.pdf
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\check1.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\nlse129.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\nlse99.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\nlsent.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\spcdalt.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\spkall.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\tfande.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\advdynamics\trdmig.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsou7deq.inc
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsou7rms.inc
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsou7rss.inc
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug1.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug10.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug11.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug12.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug13.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug14.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug1c.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug1r.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug2.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug3.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug4.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug5.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug5a.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug6.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug7.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug7a.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug7b.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug8.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\desopt\dsoug9.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\dynamics\bd03bar1.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\dynamics\bd03bar2.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\dynamics\bd03bkt.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\dynamics\bd03car.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\dynamics\bd03carb.dat
• C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\NASTRAN_2008r1\msc2008\doc\dynamics\bd03cars.dat

Use regedit.exe to manually remove from the Windows Registry the data below:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BA0D1B00147F11B49B844605412FC37D
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{00B1D0AB-F741-4B11-B948-645014F23CD7}

Open regedit.exe in order to delete the following registry values:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BA0D1B00147F11B49B844605412FC37D\ProductName
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\PTC\Creo Elements\Direct Finite Element Analysis 18.1\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{00B1D0AB-F741-4B11-B948-645014F23CD7}\

How to uninstall Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) with Advanced Uninstaller PRO

Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) is an application marketed by Parametric Technology GmbH. Frequently, computer users choose to uninstall this application. Sometimes this is hard because removing this by hand takes some know-how regarding removing Windows applications by hand. One of the best SIMPLE solution to uninstall Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to clean your Windows system.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take some time to admire the program's design and number of functions available. Advanced Uninstaller PRO is a powerful PC management program.

3. Click on the General Tools button


4. Activate the Uninstall Programs button


5. A list of the applications installed on the computer will appear

6. Navigate the list of applications until you find Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) or simply activate the Search field and type in "Creo Elements/Direct Finite Element Analysis 18.1 ( x64 )". If it is installed on your PC the Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) application will be found automatically. Notice that when you click Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) in the list of applications, some information about the program is made available to you:

• Safety rating (in the left lower corner). The star rating explains the opinion other users have about Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ), ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Click on the Read reviews button.
• Details about the application you wish to uninstall, by pressing the Properties button.

For instance you can see that for Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ):

• The web site of the program is: http://www.ptc.com
• The uninstall string is: MsiExec.exe /I{00B1D0AB-F741-4B11-B948-645014F23CD7}

7. Click the Uninstall button. A window asking you to confirm will show up. Confirm the removal by clicking Uninstall. Advanced Uninstaller PRO will automatically remove Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ).


8. After removing Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ), Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to go ahead with the cleanup. All the items that belong Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) which have been left behind will be found and you will be able to delete them. By removing Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) with Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or directories are left behind on your disk.

Your Windows PC will remain clean, speedy and ready to serve you properly.

Disclaimer

This page is not a piece of advice to remove Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) by Parametric Technology GmbH from your computer, nor are we saying that Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) by Parametric Technology GmbH is not a good application. This text only contains detailed instructions on how to remove Creo Elements/Direct Finite Element Analysis 18.1 ( x64 ) in case you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.