CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3

How to uninstall CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 from your system

This web page contains detailed information on how to uninstall CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 for Windows. The Windows release was created by Freescale. Take a look here where you can find out more on Freescale. More details about CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 can be seen at http://www.freescale.com. The application is usually found in the C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3 directory (same installation drive as Windows). The full command line for removing CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 is MsiExec.exe /I{8A29DEA1-1F8B-483C-B336-59FAB0DEFD3E}. Keep in mind that if you will type this command in Start / Run Note you may get a notification for administrator rights. mwasm56800.exe is the programs's main file and it takes close to 656.00 KB (671744 bytes) on disk.

CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 installs the following the executables on your PC, occupying about 36.90 MB (38691974 bytes) on disk.

• cvs.exe (576.50 KB)
• cwspawn.exe (64.00 KB)
• CmdIDE.exe (41.50 KB)
• IDE.exe (10.25 MB)
• InstallHelperKeys.exe (76.50 KB)
• Mwregsvr.exe (36.00 KB)
• MWRegSvrWinApp.exe (36.00 KB)
• pe_init.exe (92.00 KB)
• ccs.exe (376.00 KB)
• efind.exe (44.00 KB)
• floader.exe (30.50 KB)
• lptinit.exe (60.48 KB)
• wdreg.exe (76.06 KB)
• wdv.exe (172.04 KB)
• wdreg_gui.exe (152.00 KB)
• wdreg_gui.exe (135.50 KB)
• DPInst.exe (508.91 KB)
• mwasm56800.exe (656.00 KB)
• mwasm56800e.exe (1.26 MB)
• mwcc56800.exe (2.18 MB)
• mwcc56800e.exe (3.33 MB)
• mwld56800.exe (527.50 KB)
• mwld56800e.exe (567.00 KB)
• lptinit.exe (256.00 KB)
• 56800E Flash Programmer.exe (456.00 KB)
• FFLASH.exe (292.00 KB)
• Install_FreeMaster.exe (9.57 MB)
• qed.exe (1.55 MB)
• installPEupd.exe (519.50 KB)
• RMSD.EXE (9.17 KB)
• hexdump.exe (38.00 KB)
• srec_to_application_format.exe (192.14 KB)
• srec_to_boot_format.exe (176.13 KB)
• CheckSumGen.exe (48.00 KB)
• fileio.exe (56.00 KB)
• driver_remove.exe (5.53 KB)
• flash_over_jtag.exe (30.03 KB)
• fljtg16.exe (39.49 KB)
• fljtg32.exe (58.74 KB)
• UserPort.exe (11.50 KB)
• flash_over_jtag_v2.exe (46.53 KB)
• foj2_16.exe (44.27 KB)
• foj2_32.exe (64.04 KB)
• HostPortTest.exe (156.05 KB)
• sRecLoad.exe (112.00 KB)
• BvNtDrv.exe (700.09 KB)
• Conv2au.exe (168.05 KB)

...click to view all...

The information on this page is only about version 8.3.0000 of CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3. After the uninstall process, the application leaves some files behind on the PC. Part_A few of these are listed below.

Folders found on disk after you uninstall CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 from your computer:

• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3

The files below are left behind on your disk when you remove CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3:

• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_client-to-client\DSP56858_hsst_client\DSP56800E_hsst_client.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_client-to-client\DSP56858_hsst_client\DSP56858_hsst_client.mcp
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_client-to-client\DSP56858_hsst_client\lcf\DSP56858_ldm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_client-to-client\DSP56858_hsst_client\lcf\DSP56858_sdm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_client-to-client\DSP56858_hsst_client\support\DSP56800E_zeroBSS.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_client-to-client\DSP56858_hsst_client\support\DSP5685x_init.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_client-to-client\DSP56858_hsst_client\support\DSP5685x_vector.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\DSP56800E_hsst_client_DataVis.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\DSP56858_hsst_client_DataVis.mcp
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\lcf\DSP56858_ldm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\lcf\DSP56858_sdm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\readme.txt
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\support\DSP56800E_zeroBSS.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\support\DSP5685x_init.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800E_hsst_Data_Visualization\DSP56858_hsst_client_DataVis\support\DSP5685x_vector.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\inc\dsp568_hostioPrefix.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\hostio_file_open_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\hostio_file_read_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\hostio_file_rw_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\hostio_file_seek_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\hostio_file_write_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\hostio_stdin_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\hostio_stdout_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\dsp\src\prehostio_main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800_sim\lcf\56800_sim_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800_sim\support\56800_init.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800_sim\support\56800_init.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800_sim\support\56800_peripheral_regs.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800_sim\support\56800_vector.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800_utilities\DSP56800_xromxram.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800_utilities\DSP56800_zeroBSS.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800E_sim\lcf\sim_ldm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800E_sim\lcf\sim_sdm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800E_sim\startup\56800E_init.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56800E_sim\startup\56800E_vector.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\lcf\DSP56F805_external_mem_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\lcf\DSP56F805_xROM-xRAM_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\support\DSP56F801-802-803-805_pll.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\support\DSP56F805_init.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\support\DSP56F805_init.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\support\DSP56F805_peripheral_regs.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\support\DSP56F805_vector_pRAM.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56805\support\DSP56F805_vector_pROM.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\lcf\DSP56F807_external_mem_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\lcf\DSP56F807_xROM-xRAM_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\support\DSP56F807_init.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\support\DSP56F807_init.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\support\DSP56F807_peripheral_regs.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\support\DSP56F807_pll.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\support\DSP56F807_vector_pRAM.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56807\support\DSP56F807_vector_pROM.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56858E\lcf\DSP56858_ldm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56858E\lcf\DSP56858_sdm_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56858E\support\DSP56800E_zeroBSS.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56858E\support\DSP5685x_init.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\support\56858E\support\DSP5685x_vector.asm
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\fgets.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\fopen.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\fprintf.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\fread.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\fseek.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\fwrite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\location.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\printf.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\stdin.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\stdio tests\stdout.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\common.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\file_open_suite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\file_read_suite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\file_rw_suite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\file_seek_suite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\file_write_suite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\stdin_suite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\inc\suites\stdout_suite.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\fgets.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\fopen.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\fprintf.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\fread.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\fseek.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\fwrite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\location.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\printf.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\stdio tests\stdin.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\suites\file_open_suite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\suites\file_read_suite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\suites\file_rw_suite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\suites\file_seek_suite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\suites\file_write_suite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\suites\stdin_suite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\code\test\src\suites\stdout_suite.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\projects\DSP5600E_hostIOTest.mcp
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\DSP56800x_hostIO\projects\DSP56800_hostIOTest.mcp
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\lcf\56800_sim_linker.cmd
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\main.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\simple.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\simple.mcp
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\support\56800_init.c
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\support\56800_init.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\support\56800_peripheral_regs.h
• C:\Program Files (x86)\Freescale\CodeWarrior for DSC56800E v8.3\(CodeWarrior_Examples)\Floating Point Examples\fplib_56800_ver0.90\examples\simple\support\56800_vector.asm

Open regedit.exe to remove the registry values below from the Windows Registry:

• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{E4091CB7-410C-4697-9DD0-1399F5BBF248}C:\program files (x86)\freescale\codewarrior for dsc56800e v8.3\bin\ide.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{EE96EBB2-B689-43B7-9ABE-7B3D5FF3566F}C:\program files (x86)\freescale\codewarrior for dsc56800e v8.3\ccs\bin\ccs.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{2BE38084-BF20-4AEA-B5E3-6A5A07CFA041}C:\program files (x86)\freescale\codewarrior for dsc56800e v8.3\ccs\bin\ccs.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{7DC2EC18-164B-47FD-9C1D-21F88810C6E2}C:\program files (x86)\freescale\codewarrior for dsc56800e v8.3\bin\ide.exe

How to erase CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 from your PC with Advanced Uninstaller PRO

CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 is an application marketed by Freescale. Some people choose to remove it. This can be efortful because doing this by hand requires some skill related to removing Windows applications by hand. One of the best QUICK solution to remove CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your system, install it. This is a good step because Advanced Uninstaller PRO is the best uninstaller and general tool to clean your system.

DOWNLOAD NOW

• go to Download Link
• download the program by pressing the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to admire the program's design and wealth of features available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Click on the General Tools category


4. Activate the Uninstall Programs tool


5. A list of the programs installed on your PC will be made available to you

6. Scroll the list of programs until you find CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 or simply activate the Search feature and type in "CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3". If it is installed on your PC the CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 application will be found very quickly. Notice that after you click CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 in the list , the following data about the program is shown to you:

• Star rating (in the left lower corner). This explains the opinion other users have about CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3, from "Highly recommended" to "Very dangerous".
• Opinions by other users - Click on the Read reviews button.
• Details about the app you are about to remove, by pressing the Properties button.

For instance you can see that for CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3:

• The software company is: http://www.freescale.com
• The uninstall string is: MsiExec.exe /I{8A29DEA1-1F8B-483C-B336-59FAB0DEFD3E}

7. Press the Uninstall button. A confirmation window will appear. accept the removal by pressing Uninstall. Advanced Uninstaller PRO will then uninstall CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3.


8. After removing CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to go ahead with the cleanup. All the items that belong CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 that have been left behind will be found and you will be asked if you want to delete them. By removing CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 using Advanced Uninstaller PRO, you are assured that no registry items, files or folders are left behind on your PC.

Your computer will remain clean, speedy and able to serve you properly.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to uninstall CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 by Freescale from your PC, we are not saying that CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 by Freescale is not a good application for your PC. This text simply contains detailed instructions on how to uninstall CodeWarrior Development Studio for Freescale Digital Signal Controllers, Version 8.3 in case you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.