CAMWorks 2014

How to uninstall CAMWorks 2014 from your computer

CAMWorks 2014 is a computer program. This page holds details on how to remove it from your computer. The Windows release was developed by Geometric Americas, Inc.. More data about Geometric Americas, Inc. can be seen here. You can get more details on CAMWorks 2014 at http://www.camworks.com. Usually the CAMWorks 2014 program is to be found in the C:\Program Files\CAMWorks2014 directory, depending on the user's option during setup. The full command line for removing CAMWorks 2014 is C:\Program Files\InstallShield Installation Information\{CF0309DB-1107-2014-AA86-F35E6342D60B}\setup.exe. Keep in mind that if you will type this command in Start / Run Note you might be prompted for administrator rights. CAMWorksCopySettings.exe is the CAMWorks 2014's primary executable file and it takes approximately 123.42 KB (126384 bytes) on disk.

The following executable files are incorporated in CAMWorks 2014. They take 30.61 MB (32101912 bytes) on disk.

• CAMWorksCopySettings.exe (123.42 KB)
• CAMWorksCopySettings_v4.0.exe (123.94 KB)
• CWAdoServer32.exe (157.50 KB)
• CWCommandManagerCleanupUtility.exe (49.45 KB)
• CWCommandManagerCleanupUtility_v4.0.exe (49.95 KB)
• mirage.exe (659.50 KB)
• MS.exe (156.00 KB)
• MW3AxisTlpGen.exe (26.50 KB)
• MW5AxisTlpGen.exe (101.50 KB)
• vc10redist_x86.exe (8.56 MB)
• VC8_x86.exe (2.58 MB)
• VC8_x86_old.exe (2.56 MB)
• VC9_x86.exe (4.02 MB)
• CWVirtualMachine.exe (115.00 KB)
• Wordpad.exe (179.00 KB)
• MPSEditor.exe (88.00 KB)
• CWVoluMillAppu.exe (92.00 KB)
• CWAdoServer32.exe (156.00 KB)
• MW3AxisTlpGen.exe (31.50 KB)
• MW5AxisTlpGen.exe (81.50 KB)

...click to view all...

The information on this page is only about version 14.0.2 of CAMWorks 2014. After the uninstall process, the application leaves some files behind on the computer. Some of these are listed below.

Folders remaining:

• C:\Program Files\CAMWorks2014

Usually, the following files are left on disk:

• C:\Program Files\CAMWorks2014\CAMWorks_VC10\5axcore.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\5axmfcuiutils.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\5axui.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\5axui_res.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\5axui_res_neutral.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\5axutil.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\Accessdbu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\adclearpy.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BCGCBPRO100u80.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BCGCBPRO1610100.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BCGCBPRO161090.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BCGPStyle2007Aqua100.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BCGPStyle2007Luna100.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BCGPStyle2007Obsidian100.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BCGPStyle2007Silver100.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\BlockSearch.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CAMKernel.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\camworks.tlb
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CAMWorksCopySettings.exe
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CAMWorksCopySettings_v4.0.exe
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CamWorksEdmInterfaceu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CAMWorksHK.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CAMWorksIcon.ICO
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CAMWORKSu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\current.keymap
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CW5AxisOpernu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CW5AxisUIu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWAddinu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWAddinu_Register.bat
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWApiu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWCLRecordsu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWCommandManagerCleanupUtility.exe
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWCommandManagerCleanupUtility_v4.0.exe
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWEDConnectoru.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWEDMOpernu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWFEATSu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWGeometryu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWKernFactory.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWKernWrap.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWLic.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWMILu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWOPERNu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWPKTLIBu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWPOSTu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWPPMu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWSHAREu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWTaperLibu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWTECHDBu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWTLPATHu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWTLPGeomParamParau.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWToolpathLibu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWTOOLSu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWTurnLIBu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\CopyCommonDLLs.bat
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\CWLic.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\CWSHAREu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\CWUtilitiesSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\CWUtilsAddinSW2013.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\CWUTILSu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\GeomDiff_tab.bmp
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\Installer.bat
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\chinese\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Chinese-Traditional\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\english\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\French\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\German\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Italian\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Japanese\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Polish\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Portuguese-Brazilian\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Russian\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Spanish\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\lang\Turkish\CWUtilsResSW2013u.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\NSLMS32.DLL
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2012
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\CWFWorks.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\CWFWorksFunc.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\CWFWSHARU.DLL
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\CWGeomDiffAx.ocx
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\CWSFCUtils.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\CWSFCworks.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\fwactivexlib.ocx
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\GSSFRLibSWU.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\GSSFRMILSWU.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\GSSFRUtilsU.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\Chinese\CWFWRESU.DLL
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\Chinese\CWGeomDiffSwResu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\Chinese\CWUtilities.chm
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\Chinese-Traditional\CWFWRESU.DLL
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\Chinese-Traditional\CWGeomDiffSwResu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\Chinese-Traditional\CWUtilities.chm
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\English\CWFWRESU.DLL
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\English\CWGeomDiffSwResu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\English\CWUtilities.chm
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\French\CWFWRESU.DLL
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\French\CWGeomDiffSwResu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\French\CWUtilities.chm
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\German\CWFWRESU.DLL
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\German\CWGeomDiffSwResu.dll
• C:\Program Files\CAMWorks2014\CAMWorks_VC10\CWUtilities\SW2013\lang\German\CWUtilities.chm

Usually the following registry data will not be uninstalled:

• HKEY_CURRENT_USER\Software\Geometric\CAMWorks
• HKEY_CURRENT_USER\Software\TekSoft\CAMWorks
• HKEY_LOCAL_MACHINE\Software\Geometric Americas, Inc.\CAMWorks 2014
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{CF0309DB-1107-2014-AA86-F35E6342D60B}

How to uninstall CAMWorks 2014 from your PC with Advanced Uninstaller PRO

CAMWorks 2014 is an application by Geometric Americas, Inc.. Sometimes, computer users want to erase this application. Sometimes this is efortful because removing this manually takes some advanced knowledge regarding removing Windows applications by hand. One of the best SIMPLE approach to erase CAMWorks 2014 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your system, install it. This is good because Advanced Uninstaller PRO is a very potent uninstaller and all around utility to take care of your PC.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the green DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to admire Advanced Uninstaller PRO's interface and number of tools available. Advanced Uninstaller PRO is a very good Windows tool.

3. Click on the General Tools button


4. Activate the Uninstall Programs button


5. A list of the applications installed on your PC will be shown to you

6. Navigate the list of applications until you locate CAMWorks 2014 or simply click the Search feature and type in "CAMWorks 2014". The CAMWorks 2014 app will be found automatically. Notice that after you click CAMWorks 2014 in the list , the following information regarding the application is shown to you:

• Star rating (in the left lower corner). The star rating explains the opinion other people have regarding CAMWorks 2014, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Details regarding the application you want to uninstall, by pressing the Properties button.

For example you can see that for CAMWorks 2014:

• The web site of the program is: http://www.camworks.com
• The uninstall string is: C:\Program Files\InstallShield Installation Information\{CF0309DB-1107-2014-AA86-F35E6342D60B}\setup.exe

7. Click the Uninstall button. A confirmation dialog will appear. accept the removal by clicking the Uninstall button. Advanced Uninstaller PRO will automatically uninstall CAMWorks 2014.


8. After removing CAMWorks 2014, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to perform the cleanup. All the items of CAMWorks 2014 which have been left behind will be found and you will be asked if you want to delete them. By removing CAMWorks 2014 using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your system.

Your Windows computer will remain clean, speedy and ready to take on new tasks.

Disclaimer

This page is not a piece of advice to uninstall CAMWorks 2014 by Geometric Americas, Inc. from your PC, we are not saying that CAMWorks 2014 by Geometric Americas, Inc. is not a good application. This page simply contains detailed instructions on how to uninstall CAMWorks 2014 in case you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.