CAM Tool v1.0

How to uninstall CAM Tool v1.0 from your PC

You can find below detailed information on how to uninstall CAM Tool v1.0 for Windows. It was created for Windows by Blogger Sol Technologies. More data about Blogger Sol Technologies can be read here. More information about the application CAM Tool v1.0 can be seen at https://www.bloggersol.com/. CAM Tool v1.0 is commonly set up in the C:\Program Files (x86)\CAM Tool v1.0 directory, however this location can vary a lot depending on the user's option when installing the application. C:\Program Files (x86)\CAM Tool v1.0\Uninstall.exe is the full command line if you want to uninstall CAM Tool v1.0. CAM_TOOL.exe is the programs's main file and it takes around 16.69 MB (17499168 bytes) on disk.

The executables below are part of CAM Tool v1.0. They occupy an average of 40.03 MB (41970836 bytes) on disk.

• CAM_TOOL.exe (16.69 MB)
• Uninstall.exe (215.11 KB)
• adb.exe (922.00 KB)
• emmcdl.exe (173.00 KB)
• fastboot.exe (311.00 KB)
• fh_loader.exe (370.50 KB)
• sfk.exe (1.18 MB)
• 7z.exe (532.50 KB)
• 7za.exe (676.00 KB)
• 7zax64.exe (1.07 MB)
• adb.exe (2.52 MB)
• odin.exe (669.50 KB)
• emmcdl.exe (173.00 KB)
• fastboot.exe (1.29 MB)
• fh_loader.exe (369.00 KB)
• fld.exe (548.00 KB)
• lg.exe (8.23 MB)
• qs.exe (172.00 KB)
• recovery.exe (417.54 KB)
• linux-adk.exe (255.92 KB)
• install_x64.exe (783.00 KB)
• install_x86.exe (634.00 KB)
• extcs.exe (669.26 KB)
• process.exe (22.89 KB)
• t64-arm.exe (176.50 KB)
• t64.exe (103.50 KB)
• w64-arm.exe (162.50 KB)
• w64.exe (97.50 KB)
• cli-64.exe (73.00 KB)
• gui-64.exe (73.50 KB)

...click to view all...

The current page applies to CAM Tool v1.0 version 1.0 alone. If planning to uninstall CAM Tool v1.0 you should check if the following data is left behind on your PC.

Folders found on disk after you uninstall CAM Tool v1.0 from your PC:

• C:\Program Files (x86)\CAM Tool v1.0

The files below were left behind on your disk by CAM Tool v1.0 when you uninstall it:

• C:\Program Files (x86)\CAM Tool v1.0\6a.inf
• C:\Program Files (x86)\CAM Tool v1.0\bin\adb.exe
• C:\Program Files (x86)\CAM Tool v1.0\bin\AdbWinApi.dll
• C:\Program Files (x86)\CAM Tool v1.0\bin\AdbWinUsbApi.dll
• C:\Program Files (x86)\CAM Tool v1.0\bin\emmcdl.exe
• C:\Program Files (x86)\CAM Tool v1.0\bin\fastboot.exe
• C:\Program Files (x86)\CAM Tool v1.0\bin\fh_loader.exe
• C:\Program Files (x86)\CAM Tool v1.0\bin\Flash.lib
• C:\Program Files (x86)\CAM Tool v1.0\bin\persist.img
• C:\Program Files (x86)\CAM Tool v1.0\bin\Reboot.xml
• C:\Program Files (x86)\CAM Tool v1.0\bin\sfk.exe
• C:\Program Files (x86)\CAM Tool v1.0\bin\tmp.img
• C:\Program Files (x86)\CAM Tool v1.0\Boot\1.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\m5.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\opp1.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\A53_prog_emmc_firehose_8936.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\A57_prog_emmc_firehose_8937_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\F1_prog_emmc_firehose_8936.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\prog_emmc_firehose_8936.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\prog_emmc_firehose_8974.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\R9Plusma_prog_emmc_firehose_8976_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\R9S Pro_prog_emmc_firehose_8976_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\R9S_prog_emmc_firehose_8953_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\R9SPlus_prog_emmc_firehose_8976_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPO\R9stprog_emmc_firehose_8953_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\OPPOA57.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8610.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8909.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8916.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8917.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8917_vivo_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8936.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8936_Vivo.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8937.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8937_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8937_land_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8937_vivo_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8953.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8953_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8953_ddr_xiaomi.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8953_mido_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8976_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8976_kenzo_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8992_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_8x10.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_Sdm660_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_emmc_firehose_Sdm660_ddr_Xiaomi.elf
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_ufs_firehose_8996_ddr.elf
• C:\Program Files (x86)\CAM Tool v1.0\Boot\prog_ufs_firehose_8996_ddr-.elf
• C:\Program Files (x86)\CAM Tool v1.0\Boot\V9.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\9prog_emmc_firehose_8953_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\prog_emmc_firehose_08937_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\prog_emmc_firehose_8916.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\prog_emmc_firehose_8936.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\prog_emmc_firehose_8937_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\prog_emmc_firehose_8953_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\V5Plus_prog_emmc_firehose_8953_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\V9_prog_emmc_firehose_.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\X9_prog_emmc_firehose_8953_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\Y53_prog_emmc_firehose_8917_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\Boot\VIVO\Y71_prog_emmc_firehose_8917_ddr.mbn
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi620\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi620\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi620\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi620c\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi620c\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi620c\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi65x_a\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi65x_a\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi65x_a\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi65x_b\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi65x_b\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi65x_b\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi925\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi925\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi925\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi935\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi935\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi935\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi950\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi950\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi950\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi960\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi960\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi960\uce.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\hisi960\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\Kirin 710\fastboot.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\Kirin 710\manifest.xml
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\Kirin 710\uce.img
• C:\Program Files (x86)\CAM Tool v1.0\bootloaders\Kirin 710\xloader.img
• C:\Program Files (x86)\CAM Tool v1.0\CAM_Fastboot.dll
• C:\Program Files (x86)\CAM Tool v1.0\CAM_TOOL.exe
• C:\Program Files (x86)\CAM Tool v1.0\Data\7z.exe
• C:\Program Files (x86)\CAM Tool v1.0\Data\7za.exe
• C:\Program Files (x86)\CAM Tool v1.0\Data\7zax64.exe
• C:\Program Files (x86)\CAM Tool v1.0\Data\adb.exe
• C:\Program Files (x86)\CAM Tool v1.0\Data\AdbWinApi.dll
• C:\Program Files (x86)\CAM Tool v1.0\Data\AdbWinUsbApi.dll
• C:\Program Files (x86)\CAM Tool v1.0\Data\AndroidLib.dll
• C:\Program Files (x86)\CAM Tool v1.0\Data\bin\cyggcc_s-1.dll

Frequently the following registry keys will not be removed:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\CAM Tool v1.0

Open regedit.exe to remove the values below from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\CAM Tool v1.0\CAM_TOOL.exe

A way to erase CAM Tool v1.0 with the help of Advanced Uninstaller PRO

CAM Tool v1.0 is a program marketed by Blogger Sol Technologies. Some users want to uninstall it. Sometimes this is difficult because performing this manually requires some knowledge regarding Windows internal functioning. The best EASY procedure to uninstall CAM Tool v1.0 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, add it. This is good because Advanced Uninstaller PRO is a very potent uninstaller and general utility to take care of your Windows system.

DOWNLOAD NOW

• go to Download Link
• download the setup by clicking on the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to admire Advanced Uninstaller PRO's design and number of tools available. Advanced Uninstaller PRO is a very good PC management program.

3. Press the General Tools button


4. Click on the Uninstall Programs button


5. A list of the programs installed on the computer will be made available to you

6. Navigate the list of programs until you find CAM Tool v1.0 or simply click the Search feature and type in "CAM Tool v1.0". If it exists on your system the CAM Tool v1.0 app will be found very quickly. Notice that when you select CAM Tool v1.0 in the list of programs, some information regarding the program is made available to you:

• Safety rating (in the left lower corner). The star rating explains the opinion other people have regarding CAM Tool v1.0, from "Highly recommended" to "Very dangerous".
• Opinions by other people - Press the Read reviews button.
• Technical information regarding the program you want to remove, by clicking on the Properties button.

For instance you can see that for CAM Tool v1.0:

• The software company is: https://www.bloggersol.com/
• The uninstall string is: C:\Program Files (x86)\CAM Tool v1.0\Uninstall.exe

7. Press the Uninstall button. A confirmation page will appear. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will automatically remove CAM Tool v1.0.


8. After removing CAM Tool v1.0, Advanced Uninstaller PRO will offer to run a cleanup. Press Next to start the cleanup. All the items that belong CAM Tool v1.0 which have been left behind will be detected and you will be asked if you want to delete them. By removing CAM Tool v1.0 with Advanced Uninstaller PRO, you are assured that no Windows registry items, files or folders are left behind on your system.

Your Windows system will remain clean, speedy and able to run without errors or problems.

Disclaimer

The text above is not a piece of advice to uninstall CAM Tool v1.0 by Blogger Sol Technologies from your PC, we are not saying that CAM Tool v1.0 by Blogger Sol Technologies is not a good application for your computer. This page only contains detailed info on how to uninstall CAM Tool v1.0 supposing you decide this is what you want to do. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.