CADprofi

How to uninstall CADprofi from your computer

CADprofi is a Windows program. Read below about how to remove it from your PC. It is developed by CADprofi. You can find out more on CADprofi or check for application updates here. More details about CADprofi can be found at http://www.cadprofi.com. CADprofi is usually installed in the C:\Program Files\CADprofi directory, depending on the user's decision. The full command line for uninstalling CADprofi is C:\Program Files (x86)\InstallShield Installation Information\{7ED365C8-7CF7-4C4A-944B-063B378F6F8B}\setup.exe. Keep in mind that if you will type this command in Start / Run Note you might receive a notification for admin rights. CpSysReg.exe is the programs's main file and it takes close to 992.50 KB (1016320 bytes) on disk.

CADprofi contains of the executables below. They take 10.05 MB (10539984 bytes) on disk.

• cadprofi-connect-idc6xdycai.exe (5.30 MB)
• cadprofi-connect.exe (3.33 MB)
• CpCmin32.exe (60.00 KB)
• CpSysReg.exe (992.50 KB)
• cp_update.exe (410.00 KB)

This info is about CADprofi version 20.0.05 only. Click on the links below for other CADprofi versions:

• 23.0.09
• 09.0.23
• 22.0.03
• 20.0.15
• 10.0.18
• 10.0.13
• 21.0.15
• 12.0.15
• 23.0.07
• 08.0.21
• 18.0.10
• 19.0.19
• 17.0.15
• 12.0.11
• 07.0.05
• 22.0.05
• 17.0.25
• 11.0.09
• 21.0.03
• 18.0.17
• 08.0.19
• 10.0.19
• 11.0.01
• 12.0.19
• 17.0.16
• 18.0.07
• 20.0.01
• 21.0.05
• 17.0.17
• 19.0.01
• 07.0.15
• 17.0.21
• 24.0.09
• 07.0.09
• 08.0.03
• 12.0.01
• 09.0.03
• 18.0.18
• 22.0.07
• 18.0.13
• 17.0.23
• 20.0.09
• 09.0.07
• 18.0.05
• 18.0.01
• 11.0.12
• 12.0.03
• 21.0.07
• 20.0.07
• 19.0.18
• 12.0.17
• 21.0.01
• 07.2.21
• 11.0.11
• 18.0.11
• 23.0.04
• 07.0.07
• 22.0.09
• 18.0.19
• 22.0.11
• 09.0.21
• 19.0.07
• 18.0.02
• 10.0.15
• 10.0.01
• 19.0.12
• 22.0.01
• 19.0.17
• 12.0.05
• 20.0.02
• 17.0.07
• 22.0.12
• 23.0.12
• 19.0.05
• 19.0.03
• 21.0.11
• 17.0.05
• 21.0.09
• 11.0.05
• 20.0.12
• 19.0.11
• 10.0.07
• 24.0.03
• 20.0.03
• 19.0.15
• 17.0.01
• 18.0.03
• 17.0.19

...click to view all...
Following the uninstall process, the application leaves some files behind on the computer. Some of these are listed below.

Folders found on disk after you uninstall CADprofi from your computer:

• C:\Program Files\CADprofi

Generally, the following files are left on disk:

• C:\Program Files\CADprofi\2020.0\cadprofi-connect-idc6xdycai.exe
• C:\Program Files\CADprofi\2020.0\cp_sys_3.04_9.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_3.05_9.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i_4.00_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i_4.02_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i_4.3_15.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i_x64_4.00_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i_x64_4.01_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i_x64_4.02_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i_x64_4.3_15.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_i2_x64_4.3_15.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_4.00_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_4.01_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_4.02_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_4.3_15.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_x64_4.00_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_x64_4.01_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_x64_4.02_11.irx
• C:\Program Files\CADprofi\2020.0\cp_sys_p_x64_4.3_15.irx
• C:\Program Files\CADprofi\2020.0\cp_sys10.arx
• C:\Program Files\CADprofi\2020.0\cp_sys10_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys11ares.dll
• C:\Program Files\CADprofi\2020.0\cp_sys11ares64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys12.brx
• C:\Program Files\CADprofi\2020.0\cp_sys12.dll
• C:\Program Files\CADprofi\2020.0\cp_sys13.arx
• C:\Program Files\CADprofi\2020.0\cp_sys13.brx
• C:\Program Files\CADprofi\2020.0\cp_sys13.dll
• C:\Program Files\CADprofi\2020.0\cp_sys13_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys13_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys13_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys14.brx
• C:\Program Files\CADprofi\2020.0\cp_sys14.dll
• C:\Program Files\CADprofi\2020.0\cp_sys14.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys14_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys14_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys15.arx
• C:\Program Files\CADprofi\2020.0\cp_sys15.brx
• C:\Program Files\CADprofi\2020.0\cp_sys15.dll
• C:\Program Files\CADprofi\2020.0\cp_sys15.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys15_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys15_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys15_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys16.brx
• C:\Program Files\CADprofi\2020.0\cp_sys16.dll
• C:\Program Files\CADprofi\2020.0\cp_sys16_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys16_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys17.arx
• C:\Program Files\CADprofi\2020.0\cp_sys17.brx
• C:\Program Files\CADprofi\2020.0\cp_sys17.dll
• C:\Program Files\CADprofi\2020.0\cp_sys17.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys17_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys17_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys17_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys17_x64.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys18.arx
• C:\Program Files\CADprofi\2020.0\cp_sys18.brx
• C:\Program Files\CADprofi\2020.0\cp_sys18.dll
• C:\Program Files\CADprofi\2020.0\cp_sys18.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys18_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys18_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys18_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys18_x64.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys18ares.dll
• C:\Program Files\CADprofi\2020.0\cp_sys18ares64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys19.arx
• C:\Program Files\CADprofi\2020.0\cp_sys19.brx
• C:\Program Files\CADprofi\2020.0\cp_sys19.dll
• C:\Program Files\CADprofi\2020.0\cp_sys19.grx
• C:\Program Files\CADprofi\2020.0\cp_sys19.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys19_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys19_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys19_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys19_x64.grx
• C:\Program Files\CADprofi\2020.0\cp_sys19_x64.zrx
• C:\Program Files\CADprofi\2020.0\cp_sys19ares.dll
• C:\Program Files\CADprofi\2020.0\cp_sys19ares64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys20.brx
• C:\Program Files\CADprofi\2020.0\cp_sys20.dll
• C:\Program Files\CADprofi\2020.0\cp_sys20.grx
• C:\Program Files\CADprofi\2020.0\cp_sys20_x64.brx
• C:\Program Files\CADprofi\2020.0\cp_sys20_x64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys20_x64.grx
• C:\Program Files\CADprofi\2020.0\cp_sys20ares.dll
• C:\Program Files\CADprofi\2020.0\cp_sys20ares64.dll
• C:\Program Files\CADprofi\2020.0\cp_sys21_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys2k.arx
• C:\Program Files\CADprofi\2020.0\cp_sys40.dll
• C:\Program Files\CADprofi\2020.0\cp_sys4k.arx
• C:\Program Files\CADprofi\2020.0\cp_sys71.dll
• C:\Program Files\CADprofi\2020.0\cp_sys7k.arx
• C:\Program Files\CADprofi\2020.0\cp_sys7k_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys7m.dll
• C:\Program Files\CADprofi\2020.0\cp_sys80.dll
• C:\Program Files\CADprofi\2020.0\cp_sys8g.grx
• C:\Program Files\CADprofi\2020.0\cp_sys8k_x64.arx
• C:\Program Files\CADprofi\2020.0\cp_sys8n.grx
• C:\Program Files\CADprofi\2020.0\cp_sys8n_x64.grx
• C:\Program Files\CADprofi\2020.0\cp_sys8z.dll
• C:\Program Files\CADprofi\2020.0\cp_sys90.dll

Registry keys:

• HKEY_CURRENT_USER\Software\Cadprofi
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\738201648EAEA804993BE054450DAFDA
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{7ED365C8-7CF7-4C4A-944B-063B378F6F8B}

Registry values that are not removed from your PC:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\CADprofi\2020.0\CpSysReg.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\CADprofi\2020.0\CpSysReg.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\738201648EAEA804993BE054450DAFDA\ProductName

A way to remove CADprofi from your computer using Advanced Uninstaller PRO

CADprofi is a program marketed by the software company CADprofi. Sometimes, computer users want to erase this program. Sometimes this can be difficult because deleting this manually takes some knowledge regarding PCs. The best SIMPLE way to erase CADprofi is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, install it. This is good because Advanced Uninstaller PRO is an efficient uninstaller and all around utility to clean your Windows PC.

DOWNLOAD NOW

• navigate to Download Link
• download the program by pressing the green DOWNLOAD button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take your time to admire the program's design and number of features available. Advanced Uninstaller PRO is a very useful package of tools.

3. Press the General Tools category


4. Press the Uninstall Programs feature


5. A list of the programs installed on the PC will be shown to you

6. Scroll the list of programs until you locate CADprofi or simply activate the Search field and type in "CADprofi". If it is installed on your PC the CADprofi application will be found automatically. Notice that when you click CADprofi in the list of applications, some information about the program is shown to you:

• Safety rating (in the left lower corner). This explains the opinion other users have about CADprofi, from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information about the program you wish to remove, by pressing the Properties button.

For example you can see that for CADprofi:

• The web site of the program is: http://www.cadprofi.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{7ED365C8-7CF7-4C4A-944B-063B378F6F8B}\setup.exe

7. Click the Uninstall button. A window asking you to confirm will come up. accept the removal by clicking Uninstall. Advanced Uninstaller PRO will then uninstall CADprofi.


8. After uninstalling CADprofi, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to perform the cleanup. All the items of CADprofi that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling CADprofi with Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or directories are left behind on your disk.

Your Windows system will remain clean, speedy and ready to take on new tasks.

Disclaimer

The text above is not a piece of advice to remove CADprofi by CADprofi from your PC, we are not saying that CADprofi by CADprofi is not a good application for your computer. This text simply contains detailed info on how to remove CADprofi supposing you decide this is what you want to do. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.