Publishers

BobCAD-CAM V21 BobCAD-CAM V21





How to uninstall BobCAD-CAM V21 from your computer

This page contains complete information on how to uninstall BobCAD-CAM V21 for Windows. It was developed for Windows by BobCAD-CAM. You can read more on BobCAD-CAM or check for application updates here. More information about the software BobCAD-CAM V21 can be seen at . BobCAD-CAM V21 is usually set up in the C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21 folder, but this location may vary a lot depending on the user's choice when installing the application. The full command line for uninstalling BobCAD-CAM V21 is RunDll32. Note that if you will type this command in Start / Run Note you may be prompted for administrator rights. Bobcad21.exe is the BobCAD-CAM V21's primary executable file and it takes circa 19.89 MB (20860928 bytes) on disk.

BobCAD-CAM V21 installs the following the executables on your PC, occupying about 19.89 MB (20860928 bytes) on disk.

  • Bobcad21.exe (19.89 MB)


The current web page applies to BobCAD-CAM V21 version 21.52 alone. You can find below info on other application versions of BobCAD-CAM V21:


When planning to uninstall BobCAD-CAM V21 you should check if the following data is left behind on your PC.

Folders found on disk after you uninstall BobCAD-CAM V21 from your computer:
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21

Check for and remove the following files from your disk when you uninstall BobCAD-CAM V21:
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Agie001.wri
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\BobART PRO-X HELP.chm
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\BobCAD21.chm
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Bobcad21.exe
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\BobCAD-CAM Version 21 Manual - English_Lc.pdf
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\BobNest.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\BobNEST_Version_2.chm
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\BobNEST_Version_3.chm
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\BobNest3.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font.fnt
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT01.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT02.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT03.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT04.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT05.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT06.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT07.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT08.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT09.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT10.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT11.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT12.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT13.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT14.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT15.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT16.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT17.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT18.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT19.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT20.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT21.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT22.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT23.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT24.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT25.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT26.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT27.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT28.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT29.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT30.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT31.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT32.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT33.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT34.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT35.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT36.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT37.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT38.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT39.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT40.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT41.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT42.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT43.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT44.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT45.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT46.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT47.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT48.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT49.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\AFNT50.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\BOX.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\ENGLISH.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\GOTHIC.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\HELV.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\ROMAN.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\SCRIPT2.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\SPEC.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Font\STAMP.FNT
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\gdiplus.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\glut32.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Hh001.wri
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\hw_nmtlib_coreR.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\iges_nmtlibR.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Iso001.wri
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Iso0014.wri
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\isotest.cfg
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\License.txt
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\MFC71.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\msvcp71.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\msvcr71.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NC Config\Anilam 3000M.cfg
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NC Config\Fadal CNC88 (Format 1).cfg
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NC Config\Fanuc 18iT.cfg
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NC Config\Fanuc 6M (Simplified).cfg
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NC Config\Haas VF Series.cfg
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NC Config\HPGL.cfg
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NCVerifyR.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Nest Samples\nest example 1.cad
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Nesting\Jobs\3Parts.bnjob
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Nesting\Jobs\5Parts.bnjob
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Nesting\Jobs\pip circles.bnjob
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Nesting\Jobs\pip large square number 200.bnjob
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Nesting\Jobs\SPart.bnjob
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Nesting\NCConfig\NCController.dat
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NLibR.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\NMTLibR.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\on_nmtlibR.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\opennurbs.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\parasolid_nmtlibR.dll
  • C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Samples\3 edge surface example.cad

Use regedit.exe to manually remove from the Windows Registry the keys below:
  • HKEY_CURRENT_USER\Software\Bobcad-CAM
  • HKEY_LOCAL_MACHINE\Software\BobCAD-CAM
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{5071E947-0232-4B91-B926-CD77E7DD569C}

Registry values that are not removed from your computer:
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Bobcad21 - Copy.exe.ApplicationCompany
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Bobcad21 - Copy.exe.FriendlyAppName
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Bobcad21.exe.ApplicationCompany
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Bobcad21.exe.FriendlyAppName
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-4140949443-2109372286-1291250204-1008\\Device\HarddiskVolume2\Program Files (x86)\BobCAD-CAM\BobCAD-CAM V21\Bobcad21.exe


How to delete BobCAD-CAM V21 from your computer with the help of Advanced Uninstaller PRO

BobCAD-CAM V21 is an application released by the software company BobCAD-CAM. Some people want to uninstall this program. Sometimes this is easier said than done because performing this manually takes some experience regarding removing Windows programs manually. One of the best EASY solution to uninstall BobCAD-CAM V21 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, add it. This is a good step because Advanced Uninstaller PRO is a very useful uninstaller and all around tool to clean your PC.

DOWNLOAD NOW

  • visit Download Link
  • download the program by pressing the green DOWNLOAD button
  • set up Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. It's recommended to take some time to get familiar with the program's interface and wealth of functions available. Advanced Uninstaller PRO is a powerful system utility.

3. Click on the General Tools category
Go to General Tools


4. Activate the Uninstall Programs tool
Go to Uninstall Programs


5. A list of the applications existing on your computer will be shown to you

6. Navigate the list of applications until you locate BobCAD-CAM V21 or simply activate the Search feature and type in "BobCAD-CAM V21". The BobCAD-CAM V21 application will be found automatically. Notice that when you click BobCAD-CAM V21 in the list of applications, some data about the program is available to you:


  • Safety rating (in the left lower corner). This explains the opinion other users have about BobCAD-CAM V21, ranging from "Highly recommended" to "Very dangerous".
  • Opinions by other users - Click on the Read reviews button.
  • Technical information about the application you are about to uninstall, by pressing the Properties button.
For instance you can see that for BobCAD-CAM V21:





  • The software company is: http://www.bobcad.com
  • The uninstall string is: RunDll32
7. Press the Uninstall button. A confirmation dialog will show up. Confirm the uninstall by pressing Uninstall. Advanced Uninstaller PRO will then remove BobCAD-CAM V21.
Uninstall BobCAD-CAM V21


8. After uninstalling BobCAD-CAM V21, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to proceed with the cleanup. All the items that belong BobCAD-CAM V21 which have been left behind will be found and you will be asked if you want to delete them. By uninstalling BobCAD-CAM V21 with Advanced Uninstaller PRO, you are assured that no registry items, files or folders are left behind on your system.

Your system will remain clean, speedy and able to take on new tasks.

DOWNLOAD NOW


Geographical user distribution

  • 10.0
  • Windows XP (5.1)
  • Windows 8.1 (6.3)
  • Windows 7 (6.1)
  • Windows 8 (6.2)
Software Application


Disclaimer

This page is not a piece of advice to uninstall BobCAD-CAM V21 by BobCAD-CAM from your PC, nor are we saying that BobCAD-CAM V21 by BobCAD-CAM is not a good software application. This text only contains detailed info on how to uninstall BobCAD-CAM V21 in case you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.

2016-06-24 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2016-06-24 18:56:17.373