Autodesk Storm and Sanitary Analysis 2024

How to uninstall Autodesk Storm and Sanitary Analysis 2024 from your system

This page contains complete information on how to remove Autodesk Storm and Sanitary Analysis 2024 for Windows. It was developed for Windows by Autodesk, Inc.. More data about Autodesk, Inc. can be found here. The program is often found in the C:\Program Files\Autodesk folder (same installation drive as Windows). The full command line for uninstalling Autodesk Storm and Sanitary Analysis 2024 is C:\Program Files\Autodesk\AdODIS\V1\Installer.exe -i uninstall --trigger_point system -m C:\ProgramData\Autodesk\ODIS\metadata\{0076CD8F-A489-3A22-A394-793BA5EA1153}\bundleManifest.xml -x C:\ProgramData\Autodesk\ODIS\metadata\{0076CD8F-A489-3A22-A394-793BA5EA1153}\SetupRes\manifest.xsd. Note that if you will type this command in Start / Run Note you might get a notification for administrator rights. Storm.exe is the programs's main file and it takes around 4.61 MB (4835616 bytes) on disk.

Autodesk Storm and Sanitary Analysis 2024 contains of the executables below. They take 1.00 GB (1078494868 bytes) on disk.

• Installer.exe (19.93 MB)
• RemoveODIS.exe (6.63 MB)
• 7za.exe (1.11 MB)
• ADPClientService.exe (1.63 MB)
• AdpSDKUtil.exe (1.08 MB)
• AdskAccessCore.exe (16.21 MB)
• AdskAccessDialogUtility.exe (4.76 MB)
• AdskAccessService.exe (9.61 MB)
• AdskAccessServiceHost.exe (8.84 MB)
• AdskExecutorProxy.exe (8.05 MB)
• AdskInstallerUpdateCheck.exe (8.72 MB)
• AdskUninstallHelper.exe (6.11 MB)
• AdskUpdateCheck.exe (9.61 MB)
• DownloadManager.exe (5.88 MB)
• install_helper_tool.exe (11.65 MB)
• install_manager.exe (18.86 MB)
• LogAnalyzer.exe (7.10 MB)
• odis_uninstaller.exe (4.98 MB)
• ProcessManager.exe (8.01 MB)
• senddmp.exe (569.78 KB)
• Autodesk Access UI Host.exe (143.05 MB)
• GDThumbnailGenerator.exe (31.23 MB)
• chrome.exe (1.85 MB)
• chrome_proxy.exe (705.50 KB)
• chrome_pwa_launcher.exe (1.26 MB)
• elevation_service.exe (1.27 MB)
• interactive_ui_tests.exe (132.12 MB)
• notification_helper.exe (873.50 KB)
• GenerativeDesign.exe (100.27 MB)
• ADPClientService.exe (1.43 MB)
• GenerativeDesignServer.exe (3.94 MB)
• RestDynamoCore.exe (117.50 KB)
• GenerativeDesign.exe (134.37 MB)
• ADPClientService.exe (1.54 MB)
• GenerativeDesignServer.exe (4.06 MB)
• acad.exe (5.30 MB)
• accoreconsole.exe (372.28 KB)
• AcPerfMonAgent.exe (78.28 KB)
• AcSignApply.exe (519.78 KB)
• AcTranslators.exe (662.78 KB)
• adcadmn.exe (2.42 MB)
• addplwiz.exe (563.28 KB)
• AdMigrator.exe (750.28 KB)
• AdPreviewGenerator.exe (61.84 KB)
• AdRefMan.exe (864.78 KB)
• AdSubAware.exe (101.78 KB)
• Autodesk License Activator.exe (7.43 MB)
• AutoLispDebugAdapter.exe (129.78 KB)
• CPCompare.exe (22.28 KB)
• Dwg2Spd.exe (647.78 KB)
• DwgCheckStandards.exe (430.28 KB)
• patchTracker.exe (498.28 KB)
• pc3exe.exe (470.78 KB)
• QtWebEngineProcess.exe (633.39 KB)
• slidelib.exe (309.92 KB)
• styexe.exe (469.28 KB)
• styshwiz.exe (543.78 KB)
• xperf.exe (427.19 KB)
• AecCB.exe (763.78 KB)
• AecLaunchCurrentProject.exe (842.28 KB)
• AcBlockIndexPipeline.exe (155.28 KB)
• BlockEncoder.exe (3.92 MB)
• SuggestionEngine.exe (9.28 MB)
• AeccDwgToDgn.exe (46.78 KB)
• AeccGenericContentTool.exe (289.78 KB)
• Autodesk.Aec.Content.CatalogEditor.exe (511.55 KB)
• openssl.exe (539.63 KB)
• ShortcutEditor.exe (1.91 MB)
• DynamoCLI.exe (25.78 KB)
• DynamoSandbox.exe (28.78 KB)
• DynamoWPFCLI.exe (22.78 KB)
• InstallUpdate.exe (21.78 KB)
• ProtoTestConsoleRunner.exe (17.78 KB)
• DynamoFeatureFlags.exe (22.78 KB)
• Md2Html.exe (2.79 MB)
• GenerativeDesign.exe (134.36 MB)
• Express.exe (2.73 MB)
• Hydrographs.exe (4.28 MB)
• Storm.exe (4.61 MB)
• Das.Local.exe (156.78 KB)
• alias.exe (418.28 KB)
• dumpshx.exe (84.78 KB)
• lspsurf.exe (414.28 KB)
• FARSI.EXE (1.90 KB)
• FARSIFON.EXE (38.13 KB)
• FONTS.EXE (599.02 KB)
• Autodesk.IndustryModelDataEditor.exe (196.78 KB)
• IMBatch.exe (19.78 KB)
• ADSKArcGisFdoSrv.exe (432.28 KB)
• FdoUserManager.exe (89.78 KB)
• csupdate.exe (194.78 KB)
• H2Reg.exe (185.50 KB)
• Projekt1.exe (26.42 KB)
• Link32.exe (3.08 MB)
• Survey Attribute Manager.exe (560.00 KB)
• AcEventSync.exe (47.28 MB)
• AcQMod.exe (51.21 MB)
• AWA.SSA.DWGTranslator.exe (23.28 KB)
• BatchPrint.exe (609.78 KB)
• ADPClientService.exe (1.64 MB)
• C3D_BatchSave.exe (521.28 KB)
• RevitAccelerator.exe (200.78 KB)
• AdPreviewGenerator.exe (61.84 KB)
• AdSubAware.exe (99.15 KB)
• ATFRevitBroker.exe (45.28 KB)
• ATFRevitRCEHost.exe (61.28 KB)
• EXTRACT.EXE (99.00 KB)
• Revit.exe (1.57 MB)
• RevitWorker.exe (1.25 MB)
• Switch Autodesk Environment.exe (300.28 KB)
• DynamoAddInGenerator.exe (14.00 KB)
• DynamoCLI.exe (24.78 KB)
• DynamoWPFCLI.exe (22.28 KB)
• InstallUpdate.exe (21.28 KB)

...click to view all...

The current web page applies to Autodesk Storm and Sanitary Analysis 2024 version 13.6.268.0 only. When planning to uninstall Autodesk Storm and Sanitary Analysis 2024 you should check if the following data is left behind on your PC.

Folders remaining:

• C:\Program Files\Autodesk

Files remaining:

• C:\Program Files\Autodesk\AdODIS\V1\Access\AdskAccessCore.exe
• C:\Program Files\Autodesk\AdODIS\V1\Access\AdskIdentitySDK.dll
• C:\Program Files\Autodesk\AdODIS\V1\Access\IDManager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Access\log4cplusU.dll
• C:\Program Files\Autodesk\AdODIS\V1\Access\ui-plugins\ada\addons\adIPC.node
• C:\Program Files\Autodesk\AdODIS\V1\Access\ui-plugins\ada\addons\AdpSDKWrapper.dll
• C:\Program Files\Autodesk\AdODIS\V1\Access\ui-plugins\ada\addons\adpUtil.node
• C:\Program Files\Autodesk\AdODIS\V1\Access\ui-plugins\ada\app.asar
• C:\Program Files\Autodesk\AdODIS\V1\Access\UPI2.dll
• C:\Program Files\Autodesk\AdODIS\V1\Installer.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdAssetManager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdAutoUpdateSDK.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdCacheDBReader.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdClientStateManager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdHttpLib.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdManifestDownloader.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\adp_wrapper.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdpSDKCore.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdpSDKWrapper.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdskAccessServiceHost.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdUPIHarvester.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\condition_evaluator.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\deployment.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\DownloadManager.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\install_db_manager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\install_manager.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\install_operation_library.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\log4cplusU.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\LogAnalyzer.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\manifest_manager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\msix.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\package_db_manager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\plugins\adixhandler.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\plugins\command_handler.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\plugins\FileHandler.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\plugins\msihandler.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ProcessManager.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\property_manager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\AdskAccessUIHost.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\d3dcompiler_47.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\dxcompiler.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\dxil.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\ffmpeg.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\icudtl.dat
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\libEGL.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\libGLESv2.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\resources\app.asar
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\v8_context_snapshot.bin
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\vk_swiftshader.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-plugins\dda\app.asar
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-plugins\dda\ui\addons\adIPC.node
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-plugins\dda\ui\addons\AdpSDKWrapper.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-plugins\dda\ui\addons\adpUtil.node
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-plugins\dda\ui\addons\diskUtil.node
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\AdIDSDKLog.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\AdpSDKWrapper.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\AdskIdentityManager.exe
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\AdskProxyManager.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\AdSSOServices.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\IdIPCServer.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\IdServicesCore.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\log4cplusU_Ad_2.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\sqlite3.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\SSOPlugin\Current\AdIDSDKLog.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\SSOPlugin\Current\IdSDKPlugin.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\SSOPlugin\Current\log4cplusU_Ad_2.dll
• C:\Program Files\Autodesk\AdskIdentityManager\1.11.9.11\WebView2Loader.dll
• C:\Program Files\Autodesk\Arnold\maya2023\arnold.ico
• C:\Program Files\Autodesk\Arnold\maya2023\arnoldRenderer.xml
• C:\Program Files\Autodesk\Arnold\maya2023\bin\AdClmHub_2.0.0.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\adlmint.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\AdpSDKCore.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\AdpSDKUI.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\AdskLicensingSDK_6.3.1.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\ai.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\ai_renderview.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\arnold_icon.png
• C:\Program Files\Autodesk\Arnold\maya2023\bin\arnold_lgs.png
• C:\Program Files\Autodesk\Arnold\maya2023\bin\ArnoldLicenseManager.exe
• C:\Program Files\Autodesk\Arnold\maya2023\bin\AxFDecoding.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\AxFtoA.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\EULA.txt
• C:\Program Files\Autodesk\Arnold\maya2023\bin\kick.exe
• C:\Program Files\Autodesk\Arnold\maya2023\bin\maketx.exe
• C:\Program Files\Autodesk\Arnold\maya2023\bin\mtoa_api.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\noice.exe
• C:\Program Files\Autodesk\Arnold\maya2023\bin\oiiotool.exe
• C:\Program Files\Autodesk\Arnold\maya2023\bin\optix.6.6.0.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\oslc.exe
• C:\Program Files\Autodesk\Arnold\maya2023\bin\oslinfo.exe
• C:\Program Files\Autodesk\Arnold\maya2023\bin\ProductInformation.pit
• C:\Program Files\Autodesk\Arnold\maya2023\bin\synColor.2018.0.80.dll
• C:\Program Files\Autodesk\Arnold\maya2023\bin\UPI2.dll
• C:\Program Files\Autodesk\Arnold\maya2023\docs\arnold\ai__adp_8h.html
• C:\Program Files\Autodesk\Arnold\maya2023\docs\arnold\ai__adp_8h_source.html
• C:\Program Files\Autodesk\Arnold\maya2023\docs\arnold\ai__allocate_8h.html
• C:\Program Files\Autodesk\Arnold\maya2023\docs\arnold\ai__allocate_8h_source.html
• C:\Program Files\Autodesk\Arnold\maya2023\docs\arnold\ai__api_8h.html
• C:\Program Files\Autodesk\Arnold\maya2023\docs\arnold\ai__api_8h_source.html
• C:\Program Files\Autodesk\Arnold\maya2023\docs\arnold\ai__array_8h.html

Use regedit.exe to manually remove from the Windows Registry the data below:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\70D63E852182000058818C454F8489DE
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\70D63E852282000058818C454F8489DE
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{0076CD8F-A489-3A22-A394-793BA5EA1153}

Registry values that are not removed from your computer:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\70D63E852182000058818C454F8489DE\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\70D63E852282000058818C454F8489DE\ProductName
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Autodesk\Autodesk AdSSO\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Autodesk\Bifrost\Maya2023\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Autodesk\Maya2023\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Autodesk\MayaUSD\Maya2023\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Autodesk\PyMEL for Maya 2023\

A way to delete Autodesk Storm and Sanitary Analysis 2024 from your PC with Advanced Uninstaller PRO

Autodesk Storm and Sanitary Analysis 2024 is an application released by Autodesk, Inc.. Frequently, computer users choose to uninstall this application. Sometimes this can be troublesome because deleting this by hand requires some advanced knowledge related to PCs. The best SIMPLE approach to uninstall Autodesk Storm and Sanitary Analysis 2024 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is good because Advanced Uninstaller PRO is an efficient uninstaller and all around utility to clean your system.

DOWNLOAD NOW

• navigate to Download Link
• download the program by clicking on the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with Advanced Uninstaller PRO's interface and number of tools available. Advanced Uninstaller PRO is a powerful package of tools.

3. Press the General Tools button


4. Activate the Uninstall Programs button


5. All the programs existing on the PC will be made available to you

6. Navigate the list of programs until you locate Autodesk Storm and Sanitary Analysis 2024 or simply click the Search feature and type in "Autodesk Storm and Sanitary Analysis 2024". If it exists on your system the Autodesk Storm and Sanitary Analysis 2024 program will be found automatically. Notice that after you select Autodesk Storm and Sanitary Analysis 2024 in the list , some data about the program is made available to you:

• Safety rating (in the left lower corner). This tells you the opinion other users have about Autodesk Storm and Sanitary Analysis 2024, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information about the application you wish to uninstall, by clicking on the Properties button.

7. Click the Uninstall button. A confirmation page will come up. accept the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will then remove Autodesk Storm and Sanitary Analysis 2024.


8. After removing Autodesk Storm and Sanitary Analysis 2024, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to perform the cleanup. All the items of Autodesk Storm and Sanitary Analysis 2024 which have been left behind will be found and you will be able to delete them. By removing Autodesk Storm and Sanitary Analysis 2024 using Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or directories are left behind on your computer.

Your Windows system will remain clean, speedy and ready to serve you properly.

Disclaimer

The text above is not a recommendation to remove Autodesk Storm and Sanitary Analysis 2024 by Autodesk, Inc. from your PC, nor are we saying that Autodesk Storm and Sanitary Analysis 2024 by Autodesk, Inc. is not a good application for your PC. This page simply contains detailed instructions on how to remove Autodesk Storm and Sanitary Analysis 2024 in case you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.