hyperCAD 2009.3 hyperCAD 2009.3



A way to uninstall hyperCAD 2009.3 from your system

This page contains detailed information on how to uninstall hyperCAD 2009.3 for Windows. It is written by OPEN MIND. You can read more on OPEN MIND or check for application updates here. Click on to get more info about hyperCAD 2009.3 on OPEN MIND's website. hyperCAD 2009.3 is typically installed in the C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3 directory, however this location may differ a lot depending on the user's option while installing the application. The full command line for uninstalling hyperCAD 2009.3 is C:\Program Files (x86)\InstallShield Installation Information\{55CE4E2B-48F3-432E-9B8E-3250B9DC4AEF}\Setup.exe. Note that if you will type this command in Start / Run Note you may get a notification for admin rights. hyperCAD 2009.3's primary file takes around 208.00 KB (212992 bytes) and is called tdesign.exe.

hyperCAD 2009.3 is composed of the following executables which take 53.11 MB (55692550 bytes) on disk:



  • cladmin.exe (376.00 KB)
  • FontsConverter.exe (120.00 KB)
  • micwizard.exe (24.00 KB)
  • RegAsm.exe (52.00 KB)
  • regsvr32.exe (36.27 KB)
  • SpeechTraining.exe (52.00 KB)
  • styleConverter.exe (216.00 KB)
  • tteam.exe (3.24 MB)
  • euinst-amd64.exe (23.29 KB)
  • euinst-ia64.exe (57.79 KB)
  • sdi.exe (485.29 KB)
  • sdiline.exe (57.29 KB)
  • t1t2.exe (112.00 KB)
  • cadlab.exe (192.00 KB)
  • clhostid.exe (74.26 KB)
  • install.exe (21.50 KB)
  • lmgrd.exe (91.00 KB)
  • lmutil.exe (61.00 KB)
  • lmgrd.exe (583.50 KB)
  • lmver.exe (562.50 KB)
  • lmtools.exe (687.00 KB)
  • thinkflx.exe (744.00 KB)
  • hldrv32.exe (4.88 MB)
  • HT1T2.exe (3.00 MB)
  • HASPUserSetup.exe (10.29 MB)
  • switch.exe (188.00 KB)
  • t3dlldoctor.exe (140.00 KB)
  • T3TraceSrv.exe (132.00 KB)
  • t3traceviewer.exe (132.00 KB)
  • tdStopper.exe (19.50 KB)
  • gbplo.exe (1.26 MB)
  • iges.exe (2.00 MB)
  • Mail.exe (22.50 KB)
  • T3RegistrationManager.exe (120.00 KB)
  • t3_DocFile.exe (60.00 KB)
  • tdesign.exe (208.00 KB)
  • tdSettings.exe (3.38 MB)
  • td_run.exe (72.00 KB)
  • Zipper.exe (112.00 KB)
  • XMLEditor.exe (398.00 KB)
  • ifcadrd.exe (224.00 KB)
  • ifcadrd.exe (287.50 KB)
  • finder.exe (36.00 KB)
  • t3ATLSetup_VC6.exe (350.96 KB)
  • t3ATLSetup_VC7.exe (308.92 KB)
  • t3ATLSetup_VC8.exe (292.96 KB)
  • TTComApi.exe (164.00 KB)
  • TTintegrationTLB.exe (52.00 KB)
  • TTintegrationTLB2.exe (44.00 KB)
  • TTConnection.exe (929.60 KB)
  • TTintegration.exe (659.96 KB)
  • T3Tasker.exe (120.00 KB)
  • mbcs2utf8.exe (40.00 KB)
  • TTXmlOptionsEdit.exe (80.00 KB)
  • Test1.exe (28.00 KB)
  • TestQuery_VB.exe (32.00 KB)
  • FixCfgFile.exe (32.00 KB)
  • dcomdiag.exe (72.00 KB)
  • dcpinst.exe (227.86 KB)
  • unzip.exe (136.00 KB)
  • zip.exe (102.00 KB)
  • TTExport.exe (300.00 KB)
  • TTImport.exe (348.00 KB)
  • TTCatia.exe (164.00 KB)
  • CNEXT.exe (48.05 KB)
  • CNEXT.exe (48.05 KB)
  • CNEXT.exe (31.00 KB)
  • RegRGS.exe (44.00 KB)
  • T3ProeSetup.exe (1.43 MB)
  • nmsd.exe (144.00 KB)
  • T3StorageAnalyzer.exe (24.00 KB)
  • nmsd.exe (156.00 KB)
  • proe.exe (4.34 MB)
  • TTSWorks.exe (164.00 KB)
  • StorageExplorer.exe (68.00 KB)
  • ThumbnailExt.exe (24.00 KB)
  • TTAutoVue.exe (44.00 KB)
  • EditWorkFlow.exe (1.39 MB)
  • TTHistory.exe (340.00 KB)
  • thinkteam.exe (196.00 KB)
...click to view all...

The information on this page is only about version 2009.3 of hyperCAD 2009.3. When you're planning to uninstall hyperCAD 2009.3 you should check if the following data is left behind on your PC.

Folders found on disk after you uninstall hyperCAD 2009.3 from your computer:
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3

Usually, the following files remain on disk:
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\au.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\au.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\base_components.txt
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\Baselib.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\Baselib.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\BCGCBPRO675.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\BCGCBPRO675.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\BusyStateControlsBridge.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\BusyStateControlsBridge.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\BusyStateWorker.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\BusyStateWorker.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\cladmin.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\cladmin.msg
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\clgen.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\clgen.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\clgpl.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\clgpl.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\clgra.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\ClientTransactionProtocol.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\climg.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\cluif.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\cluif.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\CRTWrapper.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\euinst-amd64.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\euinst-ia64.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk2par.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk2par-amd64.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk2par-ia64.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk3usb.cat
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk3usb.inf
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk3usb.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk3usb-amd64.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk3usb-ia64.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk3usb-uns.cat
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\eusk3usb-uns.inf
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\Leggimi.chm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\Readme.chm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\sdi.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\sdiline.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\skeyinst.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\skeyusb.inf
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\skeyusb.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\skeyusbnt.inf
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\skeyusbnt.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\t1t2.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\usbdrv.inf
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\eutron\usbdrv.sys
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm4.1\cadlab.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm4.1\clhostid.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm4.1\install.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm4.1\license.dat
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm4.1\lmgr324a.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm4.1\lmgrd.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm4.1\lmutil.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\license.dat
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\lmgr8b.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\lmgrd.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\lmstat.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\lmtools.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\lmutil.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\lmver.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\flexlm8.1\thinkflx.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\hardlock\haspds_windows.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\hardlock\hldrv32.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\drivers\hardlock\HT1T2.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\DwgChat.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\DwgChat.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\EkErmas.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\EkErmas.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\EventQueue.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\EventQueue.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\extractimage.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\extractimage.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\FontsConverter.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\FontsConverter.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\gui\idd_aboutbox.hrc
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\gui\idd_aboutbox.msg
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\gui\ids_registration.hrc
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\gui\ids_registration.msg
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\gui\sharelib.prb
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\gx5050r.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\InputDeviceEvent.csm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\InputDeviceEvent.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\iocom.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\la.chm
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\lmgr324a.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\lmgr8b.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\mfc42.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\mfc71.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\micwizard.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\MSADDNDR.DLL
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\msvcp60.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\odwg_ini.dat
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\redax.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\RegAsm.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\regsvr32.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\smapi.dll
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\SpeechTraining.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\styleConverter.exe
  • C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\common\sys_components.txt

Registry that is not removed:
  • HKEY_LOCAL_MACHINE\Software\OPEN MIND\hyperCAD 2009.3

Registry values that are not removed from your PC:
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\OPEN MIND\hyperCAD\2009.3\thinkdesign\bin\tdesign.exe
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\OPEN MIND\hyperCAD-S\2.0\hmc.exe
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\G:\hyperCAD_2009.3\setup.exe


How to erase hyperCAD 2009.3 from your PC with the help of Advanced Uninstaller PRO

hyperCAD 2009.3 is an application released by OPEN MIND. Frequently, users decide to uninstall it. This is efortful because removing this manually takes some experience regarding Windows internal functioning. The best QUICK way to uninstall hyperCAD 2009.3 is to use Advanced Uninstaller PRO. Here is how to do this:



1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, add it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and general tool to clean your Windows PC.

DOWNLOAD NOW

2. Run Advanced Uninstaller PRO. It's recommended to take your time to get familiar with Advanced Uninstaller PRO's interface and number of functions available. Advanced Uninstaller PRO is a powerful program.

3. Click on the General Tools category
Go to General Tools


4. Press the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs existing on the PC will appear

6. Scroll the list of programs until you locate hyperCAD 2009.3 or simply activate the Search field and type in "hyperCAD 2009.3". If it is installed on your PC the hyperCAD 2009.3 app will be found automatically. Notice that when you click hyperCAD 2009.3 in the list of applications, some information about the program is made available to you:


  • Star rating (in the lower left corner). This tells you the opinion other users have about hyperCAD 2009.3, from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Click on the Read reviews button.
  • Technical information about the program you want to uninstall, by clicking on the Properties button.
For instance you can see that for hyperCAD 2009.3:


  • The software company is: http://www.openmind-tech.com
  • The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{55CE4E2B-48F3-432E-9B8E-3250B9DC4AEF}\Setup.exe
7. Click the Uninstall button. A confirmation dialog will show up. accept the removal by clicking Uninstall. Advanced Uninstaller PRO will remove hyperCAD 2009.3.
Uninstall hyperCAD 2009.3


8. After removing hyperCAD 2009.3, Advanced Uninstaller PRO will offer to run a cleanup. Press Next to start the cleanup. All the items of hyperCAD 2009.3 that have been left behind will be found and you will be asked if you want to delete them. By removing hyperCAD 2009.3 with Advanced Uninstaller PRO, you are assured that no Windows registry items, files or directories are left behind on your PC.

Your Windows system will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW

Geographical user distribution

  • 10.0
  • Windows 8.1 (6.3)
  • Windows 7 (6.1)
Software Application


Disclaimer

The text above is not a piece of advice to uninstall hyperCAD 2009.3 by OPEN MIND from your PC, we are not saying that hyperCAD 2009.3 by OPEN MIND is not a good application for your computer. This page only contains detailed info on how to uninstall hyperCAD 2009.3 supposing you want to. The information above contains registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.

2016-07-22 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2016-07-22 08:37:12.573