Publishers

Symantec Endpoint Protection Symantec Endpoint Protection





A way to uninstall Symantec Endpoint Protection from your system

Symantec Endpoint Protection is a Windows application. Read below about how to uninstall it from your PC. It was coded for Windows by Symantec Corporation. Go over here where you can get more info on Symantec Corporation. The application is often located in the C:\Program Files\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105 folder (same installation drive as Windows). The full uninstall command line for Symantec Endpoint Protection is MsiExec.exe /I{F744D87D-02A9-48E0-98C0-07E160C22F57}. SymCorpUI.exe is the programs's main file and it takes approximately 1.22 MB (1275280 bytes) on disk.

The following executables are installed together with Symantec Endpoint Protection. They occupy about 14.23 MB (14920176 bytes) on disk.

  • BHCA.exe (370.92 KB)
  • ccSvcHst.exe (140.55 KB)
  • Checksum.exe (56.39 KB)
  • ControlAP.exe (340.39 KB)
  • DevViewer.exe (1.69 MB)
  • DoScan.exe (91.89 KB)
  • dot1xtray.exe (45.89 KB)
  • DWHWizrd.exe (104.39 KB)
  • EFAInst.exe (65.95 KB)
  • FixExtend.exe (29.39 KB)
  • installTeefer.exe (561.39 KB)
  • Luawrap.exe (16.89 KB)
  • MigrateUserScans.exe (82.89 KB)
  • nlnhook.exe (23.39 KB)
  • PatchWrap.exe (33.39 KB)
  • ProtectionUtilSurrogate.exe (49.89 KB)
  • roru.exe (1.10 MB)
  • RtvStart.exe (24.89 KB)
  • SavUI.exe (196.39 KB)
  • SepLiveUpdate.exe (32.39 KB)
  • SepStub.exe (418.39 KB)
  • setiCollect.exe (1.01 MB)
  • sevinst.exe (473.48 KB)
  • sisnat.exe (236.39 KB)
  • SISStatusDlg.exe (102.39 KB)
  • Smc.exe (1.71 MB)
  • SmcGui.exe (890.89 KB)
  • smcinst.exe (1.95 MB)
  • snac.exe (281.89 KB)
  • SRTSP_CA.exe (57.45 KB)
  • SylinkDrop.exe (488.39 KB)
  • SymCorpUI.exe (1.22 MB)
  • WFPUnins.exe (407.98 KB)
  • WSCSAvNotifier.exe (60.08 KB)
...click to view all...

The current page applies to Symantec Endpoint Protection version 12.1.2100.2093 alone. For more Symantec Endpoint Protection versions please click below:

...click to view all...
When planning to uninstall Symantec Endpoint Protection you should check if the following data is left behind on your PC.

Folders remaining:
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105
  • C:\Users\%user%\AppData\Local\Symantec\Symantec Endpoint Protection

The files below were left behind on your disk by Symantec Endpoint Protection when you uninstall it:
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\{50B092DE-40D5-4724-971B-D3D90E9EE987}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\{57CD7B31-861B-46be-8EBD-AED7EDF28F76}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\AgentCore.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\atl100.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\atl110.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\AtpiEim.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\AtpiEimProxy.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\AVHostPlugin.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\AVUtil.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\BashEim.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\BashEimProxy.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\BHCA.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\BHClient.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\BHSvcPlg.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccAlert.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccEmlPxy.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccErrDsp.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccGEvt.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccGLog.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccIPC.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccJobMgr.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccL120U.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccScanw.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccSEBind.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccSet.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccSubEng.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccSvc.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccSvcHst.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ccVrTrst.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\Checksum.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\CIdsEim.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\CidsEimProxy.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\CidsTrayStatus.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\Cliproxy.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\CmnClnt\ccGEvt\Global\LM.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\CmnClnt\ccGLog\ccGLog.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\CmnClnt\ccJobSch\ccJobSch.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\Communicator.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\contentmetadata.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ControlAP.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DataMan.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\dec_abi.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DefUtDCD.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DevViewer.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DoScan.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DSCli.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ducclib.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DuLuCbk.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DuPtUpRg.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\DWHWizrd.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\dwLdPntScan.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ecmldr32.DLL
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\EFACli.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\EFAInst.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\EimLoader.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\FixExtend.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\FwsVpn.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\FWTrayStatus.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\GEDataStore.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\Help\ClientHelp.chm
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\Help\ClientHelp_SBE.chm
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\HITrayStatus.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\HPPProtectionProviderUI.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\i2ldvp3.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\IDSaux.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\IMail.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\IMailUI.ocx
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\installdata.xml
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\IPS\IPSBHO.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\IPSCA.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\IPSPlug.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\Iron.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\isolate.ini
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LDDateTm.ocx
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LDVPCtls.ocx
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LDVPDlgs.ocx
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\ldvpui.ocx
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LicenseMan.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LuAuth.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\Luawrap.exe
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LuCtl.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LueEim.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LueEimProxy.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LuEng.dll
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{07B590B3-9282-482f-BBAA-6D515D385869}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{263395A0-BEEF-4be4-80B5-202C94EF4AA0}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{263395A0-D3D8-4be4-80B5-202C94EF4AA0}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{2F090208-20DC-42f0-BBD8-B68B472F7215}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{511C2222-DEFD-22EE-B154-4A6A546B9793}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{55DE35DC-862A-44c9-8A2B-3EF451665D0A}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{73D8F7DB-5990-4EDF-945E-53047F1A8230}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{810D5A61-809F-49c2-BD75-177F0647D2BA}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{810D5A61-BEEF-49c2-BD75-177F0647D2BA}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{A8BA6A8E-8DB4-4575-8C7B-13CAF85B70AB}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{B6DC6C8F-46FA-40c7-A806-B669BE1D2D19}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{B6DC6C8F-BEEF-40c7-A806-B669BE1D2D19}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{D6AEBC07-D833-485f-9723-6C908D37F806}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{E4A1F471-FE50-441E-AF75-B246B653CCB8}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{E8827B4A-4F58-4dea-8C93-07B32A63D1C5}.dat
  • C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\Bin\LUReg\{E8827B4A-BEEF-4dea-8C93-07B32A63D1C5}.dat

Registry that is not cleaned:
  • HKEY_CURRENT_USER\Software\Symantec\Symantec Endpoint Protection
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\FE64DD8883D0A3C44ABDB3CC962F430C
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{88DD46EF-0D38-4C3A-A4DB-3BCC69F234C0}
  • HKEY_LOCAL_MACHINE\Software\Symantec\Symantec Endpoint Protection
  • HKEY_LOCAL_MACHINE\Software\Wow6432Node\Symantec\Symantec Endpoint Protection

Use regedit.exe to delete the following additional registry values from the Windows Registry:
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\FE64DD8883D0A3C44ABDB3CC962F430C\ProductName
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files (x86)\Symantec\Symantec Endpoint Protection\12.1.2100.2093.105\
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SepMasterService\ImagePath
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SmcService\ImagePath
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SNAC\ImagePath
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SyDvCtrl\ImagePath
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SyDvCtrl\SMCDir


A way to erase Symantec Endpoint Protection from your PC with the help of Advanced Uninstaller PRO

Symantec Endpoint Protection is an application offered by the software company Symantec Corporation. Some people want to remove this application. Sometimes this is easier said than done because doing this by hand takes some know-how regarding removing Windows programs manually. One of the best EASY solution to remove Symantec Endpoint Protection is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, install it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and all around tool to take care of your Windows computer.

DOWNLOAD NOW

  • visit Download Link
  • download the setup by clicking on the green DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. Take your time to admire the program's design and wealth of features available. Advanced Uninstaller PRO is a very useful system optimizer.

3. Click on the General Tools category
Go to General Tools


4. Activate the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs existing on the computer will be made available to you

6. Scroll the list of programs until you locate Symantec Endpoint Protection or simply activate the Search field and type in "Symantec Endpoint Protection". The Symantec Endpoint Protection application will be found very quickly. After you click Symantec Endpoint Protection in the list , some information about the program is made available to you:


  • Safety rating (in the left lower corner). The star rating tells you the opinion other users have about Symantec Endpoint Protection, from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Click on the Read reviews button.
  • Technical information about the application you want to remove, by clicking on the Properties button.
7. Click the Uninstall button. A confirmation dialog will appear. Confirm the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will automatically uninstall Symantec Endpoint Protection.
Uninstall Symantec Endpoint Protection


8. After uninstalling Symantec Endpoint Protection, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to start the cleanup. All the items of Symantec Endpoint Protection which have been left behind will be detected and you will be able to delete them. By uninstalling Symantec Endpoint Protection with Advanced Uninstaller PRO, you can be sure that no registry entries, files or folders are left behind on your system.

Your PC will remain clean, speedy and able to run without errors or problems.



Geographical user distribution

  • Windows 7 (6.1)
  • Windows 8 (6.2)
  • Windows XP (5.1)
  • Windows 8.1 (6.3)
  • Windows Vista (6.0)
  • 10.0
Software Application


Disclaimer

This page is not a recommendation to remove Symantec Endpoint Protection by Symantec Corporation from your PC, nor are we saying that Symantec Endpoint Protection by Symantec Corporation is not a good software application. This page only contains detailed instructions on how to remove Symantec Endpoint Protection supposing you decide this is what you want to do. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2016-06-28 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2016-06-28 14:32:28.810